| Internet-Draft | MoQ Design Space | September 2023 |
| Shi, et al. | Expires 14 March 2024 | [Page] |
This document investigates potential solution directions within the charter scope of MoQ WG. MoQ aims to provide low-latency, efficient media delivery solution for use cases including live streaming, gaming and video conferencing. To achieve low-latency media transfer efficiently, the network topology of relay nodes and the computation done at the relay nodes should be considered carefully. This document provides the analysis of those factors which can help the design of the MoQ protocols.¶
This note is to be removed before publishing as an RFC.¶
The latest revision of this draft can be found at https://VMatrix1900.github.io/moq-design-space-analysis-of-moq/draft-shi-moq-design-space-analysis-of-moq.html. Status information for this document may be found at https://datatracker.ietf.org/doc/draft-shi-moq-design-space-analysis-of-moq/.¶
Discussion of this document takes place on the Media Over QUIC Working Group mailing list (mailto:[email protected]), which is archived at https://mailarchive.ietf.org/arch/browse/moq/. Subscribe at https://www.ietf.org/mailman/listinfo/moq/.¶
Source for this draft and an issue tracker can be found at https://github.com/VMatrix1900/moq-design-space-analysis-of-moq.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 14 March 2024.¶
Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
Media over QUIC aims to provide low-latency, efficient media delivery solution for use cases including live streaming, gaming, and video conferencing. The latency requirement and the transmission pattern are analyzed in [moq-req]. To scale efficiently, relay can be used to optimize the delivery performance by caching, selective dropping, etc. However, how to accomplish that remains unclear. Lots of factors of the relay and protocol design choice can affect the performance gain of leveraging relay. This document aims to provide analysis of those design choices.¶
The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "NOT RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in BCP 14 [RFC2119] [RFC8174] when, and only when, they appear in all capitals, as shown here.¶
The first question of using relay to forward the media between the producer and the consumer is the topology of relays. In traditional CDN network, each CDN site can be viewed as a relay. Those relays are organized in a tree (see Figure 1). The producer and the consumer are usually connected to the edge node of the CDN which is the leaf node in the tree. In this case, the path for media in live streaming is usually producer - edge node 1 (relay 1) - parent node 1 (relay 2) - origin node (relay 3) - parent node 2 (relay 4) - edge node 2 (relay 5) - consumer, i.e. the media need to first go up to the root of the tree, then go down to another leaf node, traversing multiple (at least 3) relays if the CDN hierarchy is deep or the producer and the consumer is highly distributed. The tree topology is simple to build since the path of the stream is fixed and the leaf node can be lightweight and deployed closely to user. The computing intensive process can be put in the much more powerful root servers.¶
[QUICR-arch] is similar to the tree topology of CDN with one improvement: the relay can shortcut the media transmission. If the producer and the consumer share a parent relay, the media will be forwarded in the relay instead of the root of the tree (called Origin in QUICR's term).¶
+----------+
+----------->| Root +-----------+
| +----------+ |
| |
+----+-----+ +----v-----+
+----->| Parent-1 | | Parent-2 +--------+
| +----------+ +----------+ |
| |
+----+-----+ +----v-----+
| Edge-1 | | Edge-2 |
+----^-----+ +----------+
| |
| |
+-----+----+ +---v------+
| Producer | | Consumer |
+----------+ +----------+
Another approach is to connect the relays in a dynamic mesh instead of a static hierarchy. Alibaba's low-latency live streaming network builds on a flat CDN overlay [LiveNet]. A centralized controller collects the latency between each relay periodically and calculates the optimal path (latency-wise) for each media stream dynamically. Alibaba claims the flat topology reduce the latency by half compared to static hierarchy. An example is shown in Figure 2, the media stream is forwarded through relay 1 and relay 4, only 2 hops. If the network path between relay 1 and relay 4 are congested, relay 1 - relay 2/3 - relay 4 maybe used to provide lower-latency forwarding.¶
The controller can be connected with 3rd party application provider and manages the interactive media communication between producer and consumer for the application provider. The interactive media can be delivered to other consumers via certain relays of the live streaming network. A request of interactive media communication can be triggered by a consumer. The request is sent to the application provider which then attempts to pull related media of corresponding consumer and producer from the live streaming network. The application provider merges the media containing the producer and the consumer and delivers the merged media to the live streaming network. The live steaming network conducts the media switching for the corresponding producer, consumer and other consumers via the corresponding relays upon the receipt of the media switching request.¶
+-----------------------------------------+
| Controller |
+-----------------------------------------+
| |
| +---------+ |
| +-------> Relay-2 +---------+ |
| | +----+----+ path 2 | |
| | | | |
+----------+ | +----+----+ | +----v----+ | +----------+
| Producer +--+>| Relay-1 +-------+---------> Relay-4 +-+-->| Consumer |
+----------+ | +----+----+ | path 1 +---------+ | +----------+
| | | | |
| | | | |
| | +----+----+ | |
| +-------+ Relay-3 +---------+ |
| +---------+ |
| |
+-----------------------------------------+
Traditionally the CDN are using HTTP to support live streaming. The media stream is broken into a series of chunks which are mapped to HTTP resources. In this way, the HTTP stack and infrastructure is reused. Since HTTP is stateless, each relay only need to act as an HTTP server/client. There is no need to store the relationship between different HTTP flows hence the relay is easier to implement. However, such a stateless HTTP server will suffer from the delay of the chunk because each relay need to download the chunk first before it can serve the chunk to the downstream node as an HTTP server. The delay will be stacked along with the relay chain. Reducing the chunk size can reduce the delay, but the number of chunk will increase thus brings higher burden of management and signalling.¶
Using pub/sub as the metaphor requires that the relay node keeps track of the mapping between the publisher and subscribers, i.e. the subscription information state. A packet receive from the publisher can be duplicated and forwarded to subscribers immediately without any delay, forming a relay chain for packets instead of chunks. HTTP can be modified to send partial chunks before a full chunk is received, then the downstream HTTP stream will bind with the upstream one, essentially brings back the subscription information state.¶
Another way to eliminate the state in the relay node is to encode the state information on the data-plane. When the producer sends out the media, it tags the subscriber information in each packet or flow. The relay forwards the packet or flow based on the tag. The relay node need to be preloaded the tag forwarding rule. Luckily this tag forwarding rule is related to the topology which is rather static comparing to the highly dynamic media stream subscriber information.¶
The media flow sending from the producer to the consumer will go through several relays. The media content will be encrypted using QUIC encryption as requested in charter. But whether the relay node will terminate the QUIC connection remains open. There are following two options to implement the MoQ protocol stack.¶
The first option is to running the entire MoQ protocol inside QUIC encryption, including the media metadata which is needed by relay (see Figure 3). Thus the relay has to terminate the QUIC connection, decrypting the QUIC payload. This will require each relay node hold a valid CA certificate and run the CA verification process. Just like what the CDN node does nowadays.¶
Media (Metadata + Content)
----------------------------------------------
Protocol header | Protocol payload <-------- MoQ
----------------------------------------------
QUIC <-------- Transport
The second option is to only encrypt the media content using QUIC encryption but leave the metadata to other mechanism (see Figure 4). In this way, the QUIC connection is from producer to consumer. The relay does not need to decrypt the QUIC, saving the computing power. As the charter put it: "Even when media content is end-to-end encrypted, the relays can access metadata. Hence a new mechanism to convey the metadata to the relay is needed, similar to SDP for RTP, or m3u8 file for HLS.¶
Media metadata | Media content <-----\
-------------------------|----------------------- \
Protocol header | Protocol payload <------ MoQ
-------------------------|----------------------- /
Other | QUIC <-----/
When the metadata is not carried inside the QUIC payload, it should be protected from unauthorized third-part access to to protect the privacy. Relay should be authenticated to access the metadata.¶