| Internet-Draft | YANG Model for AMM | August 2023 |
| Wang, et al. | Expires 7 February 2024 | [Page] |
Alternate-Marking Method (AMM) is a technique used to perform packet loss, delay, and jitter measurements on live traffic. This document defines a YANG data model for Alternate Marking Method.¶
This Internet-Draft is submitted in full conformance with the provisions of BCP 78 and BCP 79.¶
Internet-Drafts are working documents of the Internet Engineering Task Force (IETF). Note that other groups may also distribute working documents as Internet-Drafts. The list of current Internet-Drafts is at https://datatracker.ietf.org/drafts/current/.¶
Internet-Drafts are draft documents valid for a maximum of six months and may be updated, replaced, or obsoleted by other documents at any time. It is inappropriate to use Internet-Drafts as reference material or to cite them other than as "work in progress."¶
This Internet-Draft will expire on 7 February 2024.¶
Copyright (c) 2023 IETF Trust and the persons identified as the document authors. All rights reserved.¶
This document is subject to BCP 78 and the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect to this document. Code Components extracted from this document must include Revised BSD License text as described in Section 4.e of the Trust Legal Provisions and are provided without warranty as described in the Revised BSD License.¶
Alternate-Marking Method ([RFC9341] [RFC9342]) is a technique used to perform packet loss, delay, and jitter measurements on live traffic. [RFC9343] defines how to encode Alternate-Marking information in IPv6 Extension Header. [I-D.ietf-mpls-inband-pm-encapsulation] defines how to encode Alternate-Marking information in MPLS Label Stack. This document defines a YANG data model for alternate marking method.¶
This section presents a simplified graphical representation of the AMM data model using a YANG tree diagram [RFC8340].¶
module: ietf-alternate-marking
+--rw configuration
+--rw alternate-marking
+--rw global
| +--rw label? uint32
| +--rw fii-mode? enumeration
+--rw head-node
| +--rw flow* [flow-id]
| +--rw flow-id uint32
| +--rw alternate-status? enable-status
| +--rw period? alternate-marking-period
| +--rw hop-by-hop-status? enable-status
| +--rw source-mac? yang:mac-address
| +--rw dest-mac? yang:mac-address
| +--rw vlan-id? uint16
| +--rw internal-vlan-id? uint16
| +--rw priority-8021p? uint8
| +--rw sip? inet:ip-prefix
| +--rw dip? inet:ip-prefix
| +--rw protocol? uint8
| +--rw source-port? uint16
| +--rw dest-port? uint16
| +--rw vpn-type? enumeration
| +--rw vpn-name? string
| +--rw if-name string
| +--rw member-port? string
+--rw end-node
+--rw relation* [flow-id]
+--rw flow-id uint32
+--rw (vpn-type)?
| +--:(vrf)
| | +--rw vrf-name string
| +--:(vpws)
| | +--rw vpws-name string
| +--:(vpls)
| +--rw vpls-name string
+--rw period? alternate-marking-period
+--rw hop-by-hop-status? enable-status
+--rw if-name? string
¶
<CODE BEGINS> file "[email protected]" module ietf-alternate-marking { yang-version "1.1"; namespace "urn:ietf:params:xml:ns:yang:ietf-alternate-marking"; prefix alternate-marking; import ietf-inet-types { prefix inet ; revision-date 2013-07-15 ; reference "RFC 6991: Common YANG Data Types"; } import ietf-yang-types { prefix yang ; revision-date 2013-07-15 ; reference "RFC 6991: Common YANG Data Types"; } organization "IETF IPPM (IP Performance Measurement) Working Group"; contact "WG Web: <http://datatracker.ietf.org/group/ippm/> WG List: <mailto:[email protected]> Author: Minxue Wang <mailto:[email protected]> Author: Liuyan Han <mailto:[email protected]> Author: Xiao Min <mailto:[email protected]> Author: Jun Guo <mailto:[email protected]> Author: Massimo Nilo <mailto:[email protected]>"; description "This document defines a YANG data model used for alternate marking method. This YANG model conforms to the Network Management Datastore Architecture (NMDA) as described in RFC 8342. Copyright (c) 2023 IETF Trust and the persons identified as authors of the code. All rights reserved. Redistribution and use in source and binary forms, with or without modification, is permitted pursuant to, and subject to the license terms contained in, the Revised BSD License set forth in Section 4.c of the IETF Trust's Legal Provisions Relating to IETF Documents (https://trustee.ietf.org/license-info). This version of this YANG module is part of RFC XXXX; see the RFC itself for full legal notices. The key words 'MUST', 'MUST NOT', 'REQUIRED', 'SHALL', 'SHALL NOT', 'SHOULD', 'SHOULD NOT', 'RECOMMENDED', 'NOT RECOMMENDED', 'MAY', and 'OPTIONAL' in this document are to be interpreted as described in BCP 14 (RFC 2119) (RFC 8174) when, and only when, they appear in all capitals, as shown here."; revision 2022-05-11 { description 'First draft.' ; reference 'RFC XXXX: A YANG Data Model for Alternate ' + 'Marking Method.' ; } typedef alternate-marking-period { type enumeration { enum 1s { value 1 ; description 'Alternate marking period is 1s.' ; } enum 10s { value 2 ; description 'Alternate marking period is 10s.' ; } enum 30s { value 3 ; description 'Alternate marking period is 30s.' ; } enum 60s { value 4 ; description 'Alternate marking period is 60s.' ; } enum 5min { value 5 ; description 'Alternate marking period is 5min.' ; } } description 'Alternate marking period,including ' + '1s,10s,30s,60s,5min.' ; } typedef enable-status { type enumeration { enum enable { value 1 ; description 'Enables the function.' ; } enum disable { value 0 ; description 'Disables the function.' ; } } description 'Enable status,including enable and disable.' ; } container configuration { description 'Configuration of alternate marking model Info.' ; container alternate-marking { description 'alternate-marking flow configuration.' ; container global { description 'Global configuration.' ; leaf label { type uint32 { range '4..6 | 8..12' { description 'The range of the label.' ; } } default 12 ; description 'The label ranges from 4 to 6 and 8 ' + 'to 12(default:12).' ; } leaf fii-mode { type enumeration { enum non-bottom { value 0 ; description 'flow-id is not at the bottom ' + 'of label stack.' ; } enum bottom { value 1 ; description 'flow-id is at the bottom of ' + 'label stack.' ; } } default non-bottom ; description 'Position ID of the guide label.' ; } } container head-node { description 'Configure alternate-marking flow coloring.' ; list flow { key flow-id ; description 'Configure alternate-marking flow coloring.' ; leaf flow-id { type uint32 { range 1..1048575 { description 'The range of flow id.' ; } } description 'The flow id to identify a specific flow, ' + 'ranges from 1 to 1048575. In IPv6 ' + 'encoding it is called FlowMonID and in ' + 'MPLS encoding it is called Flow-ID.' ; } leaf alternate-status { type enable-status ; default enable ; description 'The status of flow alternate marking, ' + 'including enable and disable' + '(default:enable).' ; } leaf period { type alternate-marking-period ; default 30s ; description 'The period of flow coloring,including ' + '1s,10s,30s,60s and 5min(default:30s).' ; } leaf hop-by-hop-status { type enable-status ; default disable ; description 'The status of hop-by-hop coloring, ' + 'including enable and ' + 'disable(default:enable).' ; } leaf source-mac { type yang:mac-address ; description 'The source MAC address.' ; } leaf dest-mac { type yang:mac-address ; description 'The destination MAC address.' ; } leaf vlan-id { type uint16 { range 1..4094 { description 'The range of VLAN ID.' ; } } description 'The value of vlan ID,ranges from 1 ' + 'to 4094.' ; } leaf internal-vlan-id { type uint16 { range 1..4094 { description 'The range of internal VLAN ID.' ; } } description 'The value of internal vlan ID,ranges ' + 'from 1 to 4094.' ; } leaf priority-8021p { type uint8 { range 0..7 { description 'The range of priority-8021p.' ; } } description 'The value of priority-8021p,ranges ' + 'from 0 to 7.' ; } leaf sip { type inet:ip-prefix ; description 'The source ip address.' ; } leaf dip { type inet:ip-prefix ; description 'The destination ip address.' ; } leaf protocol { type uint8 { range 1..255 { description 'The range of protocol.' ; } } description 'The protocol number,ranges from 1 to 255.' ; } leaf source-port { type uint16 { range 1..65535 { description 'The range of port number.' ; } } description 'The source port,ranges from 1 to ' + '65535.' ; } leaf dest-port { type uint16 { range 1..65535 { description 'The range of port number.' ; } } description 'The destination port,ranges from ' + '1 to 65535.' ; } leaf vpn-type { type enumeration { enum l3vpn { value 0 ; description 'The vpn type is l3vpn.' ; } enum l2vpn { value 1 ; description 'The vpn type is l2vpn.' ; } } default l3vpn ; description 'The VPN type of the UNI interface.' ; } leaf vpn-name { type string { length 1..31 { description 'The range of VRF name length.' ; } } description 'The access VPN name of ip flow.' ; } leaf if-name { type string { length 1..31 ; } mandatory true ; description 'The UNI interface name of ip flow.' ; } leaf member-port { type string ; description 'The member port of the UNI interface.' ; } } } container end-node { description 'Configure the relation between Flowid and VPN.' ; list relation { key flow-id ; description 'Configure the relation between Flowid ' + 'and VPN.' ; leaf flow-id { type uint32 { range 1..1048575 { description 'The range of flow-id.' ; } } description 'The flow id to identify a specific flow, ' + 'ranges from 1 to 1048575.' ; } choice vpn-type { description 'Choose one from vrf and vpws.' ; case vrf { description 'Type is VRF.' ; leaf vrf-name { type string { length 1..32 { description 'This string length ranges from ' + '1 to 32.' ; } } mandatory true ; description 'The name of VRF,this string length ' + 'ranges from 1 to 32.' ; } } case vpws { description 'Type is vpws.' ; leaf vpws-name { type string { length 1..32 { description 'This string length ranges from ' + '1 to 32.' ; } } mandatory true ; description 'The name of VPWS,this string length ' + 'ranges from 1 to 32.' ; } } case vpls { description 'Type is VPLS.' ; leaf vpls-name { type string { length 1..32 { description 'This string length ranges from ' + '1 to 32.' ; } } mandatory true ; description 'The name of VPLS,this string length ' + 'ranges from 1 to 32.' ; } } } leaf period { type alternate-marking-period ; default 30s ; description 'The flip period of relation,including ' + '1s,10s,30s,60s,5min(default:30s).' ; } leaf hop-by-hop-status { type enable-status ; default disable ; description 'The status of hop-by-hop,including enable ' + 'and disable(default:disable).' ; } leaf if-name { type string { length 1..31 ; } description 'The UNI interface name of relation.' ; } } } } } } <CODE ENDS>¶
TBD.¶
TBD.¶
The authors would like to acknowledge Zhanwei Dou and Chuang Tang for their contribution to this document.¶
The authors would like to acknowledge Giuseppe Fioccola and Mauro Cociglio for their careful review and very helpful comments.¶