OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018
bootconsole [early0] enabled
Initial ramdisk at: 0x (ptrval) (512 bytes)
Zone ranges:
DMA32 empty
Normal [mem 0x0000000080200000-0x000000017fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080200000-0x000000017fffffff]
Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff]
elf_hwcap is 0x112d
percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440
Built 1 zonelists, mobility grouping on. Total pages: 1033735
Kernel command line: console=ttyS0 ro root=/dev/vda init=/init
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sorting __ex_table...
Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
riscv,cpu_intc,0: 64 local interrupts mapped
riscv,cpu_intc,1: 64 local interrupts mapped
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1
Call Trace:
[< (ptrval)>] walk_stackframe+0x0/0xa2
[< (ptrval)>] show_stack+0x26/0x34
[< (ptrval)>] dump_stack+0x5e/0x7c
[< (ptrval)>] __warn+0xc6/0xdc
[< (ptrval)>] warn_slowpath_null+0x2c/0x3e
[< (ptrval)>] riscv_irq_enable+0x8e/0x94
[< (ptrval)>] irq_enable+0x3a/0x6a
[< (ptrval)>] __irq_startup+0x80/0x88
[< (ptrval)>] irq_startup+0x4e/0xe2
[< (ptrval)>] irq_activate_and_startup+0x1c/0x28
[< (ptrval)>] __irq_do_set_handler+0x6e/0x134
[< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a
[< (ptrval)>] plic_init+0x216/0x34a
[< (ptrval)>] of_irq_init+0x132/0x232
[< (ptrval)>] irqchip_init+0x10/0x1c
[< (ptrval)>] init_IRQ+0x8/0x14
[< (ptrval)>] start_kernel+0x1f6/0x32c
[< (ptrval)>] _sinittext+0x4e/0x56
random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0
---[ end trace 3f245499100bcdd5 ]---
riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
smp: Brought up 1 node, 2 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource riscv_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=20 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
SGI XFS with ACLs, security attributes, no debug enabled
random: fast init done
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A
OF: fdt: Ignoring memory range 0x80000000 - 0x80200000
Linux version 4.15.0-rc9-00064-gf923ce3a29af (rjones@trick.home.annexia.org) (gcc version 7.3.1 20180129 (GCC)) #1 SMP Thu Feb 15 10:59:13 GMT 2018
bootconsole [early0] enabled
Initial ramdisk at: 0x (ptrval) (512 bytes)
Zone ranges:
DMA32 empty
Normal [mem 0x0000000080200000-0x000000017fffffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000080200000-0x000000017fffffff]
Initmem setup node 0 [mem 0x0000000080200000-0x000000017fffffff]
elf_hwcap is 0x112d
percpu: Embedded 15 pages/cpu @ (ptrval) s29592 r0 d31848 u61440
Built 1 zonelists, mobility grouping on. Total pages: 1033735
Kernel command line: console=ttyS0 ro root=/dev/vda init=/init
Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
Sorting __ex_table...
Memory: 4119768K/4192256K available (5849K kernel code, 340K rwdata, 1541K rodata, 200K init, 847K bss, 72488K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
NR_IRQS: 0, nr_irqs: 0, preallocated irqs: 0
riscv,cpu_intc,0: 64 local interrupts mapped
riscv,cpu_intc,1: 64 local interrupts mapped
------------[ cut here ]------------
WARNING: CPU: 1 PID: 0 at drivers/irqchip/irq-riscv-intc.c:159 riscv_irq_enable+0x92/0x94
CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.15.0-rc9-00064-gf923ce3a29af #1
Call Trace:
[< (ptrval)>] walk_stackframe+0x0/0xa2
[< (ptrval)>] show_stack+0x26/0x34
[< (ptrval)>] dump_stack+0x5e/0x7c
[< (ptrval)>] __warn+0xc6/0xdc
[< (ptrval)>] warn_slowpath_null+0x2c/0x3e
[< (ptrval)>] riscv_irq_enable+0x8e/0x94
[< (ptrval)>] irq_enable+0x3a/0x6a
[< (ptrval)>] __irq_startup+0x80/0x88
[< (ptrval)>] irq_startup+0x4e/0xe2
[< (ptrval)>] irq_activate_and_startup+0x1c/0x28
[< (ptrval)>] __irq_do_set_handler+0x6e/0x134
[< (ptrval)>] irq_set_chained_handler_and_data+0x2c/0x4a
[< (ptrval)>] plic_init+0x216/0x34a
[< (ptrval)>] of_irq_init+0x132/0x232
[< (ptrval)>] irqchip_init+0x10/0x1c
[< (ptrval)>] init_IRQ+0x8/0x14
[< (ptrval)>] start_kernel+0x1f6/0x32c
[< (ptrval)>] _sinittext+0x4e/0x56
random: get_random_bytes called from print_oops_end_marker+0x3a/0x52 with crng_init=0
---[ end trace 3f245499100bcdd5 ]---
riscv,plic0,c000000: mapped 10 interrupts to 2/4 handlers
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
Console: colour dummy device 80x25
Calibrating delay loop (skipped), value calculated using timer frequency.. 20.00 BogoMIPS (lpj=40000)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
Hierarchical SRCU implementation.
smp: Bringing up secondary CPUs ...
clocksource: riscv_clocksource: mask: 0xffffffffffffffff max_cycles: 0x24e6a1710, max_idle_ns: 440795202120 ns
smp: Brought up 1 node, 2 CPUs
devtmpfs: initialized
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
futex hash table entries: 512 (order: 3, 32768 bytes)
NET: Registered protocol family 16
vgaarb: loaded
SCSI subsystem initialized
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
clocksource: Switched to clocksource riscv_clocksource
NET: Registered protocol family 2
TCP established hash table entries: 32768 (order: 6, 262144 bytes)
TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 32768 bind 32768)
UDP hash table entries: 2048 (order: 4, 65536 bytes)
UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Unpacking initramfs...
Initialise system trusted keyrings
workingset: timestamp_bits=62 max_order=20 bucket_order=0
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
nfs4filelayout_init: NFSv4 File Layout Driver Registering...
nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
SGI XFS with ACLs, security attributes, no debug enabled
random: fast init done
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
io scheduler mq-deadline registered
io scheduler kyber registered
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
console [ttyS0] disabled
10000000.uart: ttyS0 at MMIO 0x10000000 (irq = 11, base_baud = 230400) is a 16550A
console [ttyS0] enabled
console [ttyS0] enabled
[drm] radeon kernel modesetting enabled.
[drm] radeon kernel modesetting enabled.
loop: module loaded
loop: module loaded
libphy: Fixed MDIO Bus: probed
libphy: Fixed MDIO Bus: probed
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ehci-pci: EHCI PCI platform driver
ehci-platform: EHCI generic platform driver
ehci-platform: EHCI generic platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
ohci-pci: OHCI PCI platform driver
ohci-platform: OHCI generic platform driver
ohci-platform: OHCI generic platform driver
usbcore: registered new interface driver uas
usbcore: registered new interface driver uas
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver usb-storage
mousedev: PS/2 mouse device common for all mice
mousedev: PS/2 mouse device common for all mice
usbcore: registered new interface driver usbhid
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
usbhid: USB HID core driver
NET: Registered protocol family 10
NET: Registered protocol family 10
Segment Routing with IPv6
Segment Routing with IPv6
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver
NET: Registered protocol family 17
NET: Registered protocol family 17
Key type dns_resolver registered
Key type dns_resolver registered
bootconsole [early0] uses init memory and must be disabled even before the real one is ready
bootconsole [early0] uses init memory and must be disabled even before the real one is ready
bootconsole [early0] disabled
bootconsole [early0] disabled
Loading compiled-in X.509 certificates
EXT4-fs (vda): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (vda): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (vda): mounted filesystem with ordered data mode. Opts: (null)
VFS: Mounted root (ext4 filesystem) readonly on device 254:0.
Freeing unused kernel memory: 200K
This architecture does not have kernel memory protection.
EXT4-fs (vda): re-mounted. Opts: (null)
Thu Feb 22 14:29:00 UTC 2018
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff
inet 10.0.2.15/24 scope global eth0
valid_lft forever preferred_lft forever
inet6 fe80::5054:ff:fe12:3456/64 scope link tentative
valid_lft forever preferred_lft forever
3: sit0@NONE: <NOARP> mtu 1480 qdisc noop state DOWN group default qlen 1000
link/sit 0.0.0.0 brd 0.0.0.0
default via 10.0.2.2 dev eth0
10.0.2.0/24 dev eth0 proto kernel scope link src 10.0.2.15
Welcome to the Fedora/RISC-V stage4 builder
+ set -e
+ dnf clean all
0 files removed
+ useradd -d /builddir mockbuild
+ su -c 'mkdir /builddir/build' mockbuild
+ echo '%_topdir /builddir/build'
+ su -c 'rpm -i /var/tmp/libX11-1.6.5-5.fc27.src.rpm' mockbuild
+ dnf -y builddep /builddir/build/SPECS/libX11.spec
Local RPMS 0% [ ] --- B/s | 0 B --:-- ETA
Local RPMS 6% [= ] 2.9 MB/s | 886 kB 00:04 ETA
Local RPMS 12% [== ] 2.9 MB/s | 1.7 MB 00:04 ETA
Local RPMS 19% [===- ] 2.9 MB/s | 2.7 MB 00:03 ETA
Local RPMS 26% [===== ] 2.9 MB/s | 3.7 MB 00:03 ETA
Local RPMS 34% [======- ] 3.0 MB/s | 4.7 MB 00:03 ETA
Local RPMS 40% [======== ] 3.0 MB/s | 5.7 MB 00:02 ETA
Local RPMS 48% [=========- ] 3.0 MB/s | 6.7 MB 00:02 ETA
Local RPMS 55% [=========== ] 2.8 MB/s | 7.7 MB 00:02 ETA
Local RPMS 62% [============ ] 2.8 MB/s | 8.6 MB 00:01 ETA
Local RPMS 69% [=============- ] 2.8 MB/s | 9.6 MB 00:01 ETA
Local RPMS 76% [=============== ] 2.8 MB/s | 11 MB 00:01 ETA
Local RPMS 82% [================- ] 2.9 MB/s | 12 MB 00:00 ETA
Local RPMS 89% [=================- ] 2.9 MB/s | 12 MB 00:00 ETA
Local RPMS 96% [=================== ] 2.9 MB/s | 13 MB 00:00 ETA
Local RPMS 2.4 MB/s | 14 MB 00:05
Last metadata expiration check: 0:01:42 ago on Thu Feb 22 14:29:35 2018.
Dependencies resolved.
================================================================================
Package Arch Version Repository
Size
================================================================================
Installing:
libXau-devel riscv64 1.0.8-11.fc28 local 19 k
libXdmcp-devel riscv64 1.1.2-3.fc28 local 15 k
libxcb-devel riscv64 1.12-5.0.riscv64.fc28 local 1.0 M
perl-Pod-Usage noarch 4:1.69-408.fc27.0.riscv64 local 89 k
xorg-x11-proto-devel noarch 7.7-20.fc25 local 287 k
xorg-x11-util-macros noarch 1.19.0-5.fc24 local 54 k
xorg-x11-xtrans-devel noarch 1.3.5-3.fc24 local 86 k
Installing dependencies:
autoconf noarch 2.69-26.fc28 local 709 k
automake noarch 1.15.1-3.fc28 local 706 k
emacs-filesystem noarch 1:25.3-5.fc28 local 67 k
libXau riscv64 1.0.8-11.fc28 local 42 k
libXdmcp riscv64 1.1.2-3.fc28 local 48 k
libpkgconf riscv64 1.4.1-1.fc27 local 74 k
libtool riscv64 2.4.6-21.fc27 local 707 k
libxcb riscv64 1.12-5.0.riscv64.fc28 local 708 k
m4 riscv64 1.4.18-5.fc28 local 369 k
perl-Carp noarch 1.42-408.fc27.0.riscv64 local 84 k
perl-Data-Dumper riscv64 2.167-408.fc27.0.riscv64 local 149 k
perl-Encode riscv64 4:2.94-16.fc27 local 1.4 M
perl-Errno riscv64 1.28-408.fc28.1.riscv64 local 73 k
perl-Exporter noarch 5.72-408.fc27.0.riscv64 local 87 k
perl-File-Path noarch 2.15-1.fc27 local 37 k
perl-File-Temp noarch 0.230.400-408.fc27.0.riscv64 local 103 k
perl-Getopt-Long noarch 1:2.50-3.fc27 local 61 k
perl-HTTP-Tiny noarch 0.070-408.fc27.0.riscv64 local 97 k
perl-IO riscv64 1.38-408.fc28.1.riscv64 local 176 k
perl-MIME-Base64 riscv64 3.15-408.fc27.0.riscv64 local 111 k
perl-PathTools riscv64 3.67-408.fc27.0.riscv64 local 166 k
perl-Pod-Escapes noarch 1:1.07-408.fc27.0.riscv64 local 77 k
perl-Pod-Perldoc noarch 3.28-408.fc27.0.riscv64 local 139 k
perl-Pod-Simple noarch 1:3.35-408.fc27.0.riscv64 local 271 k
perl-Scalar-List-Utils riscv64 3:1.48-1.fc27 local 119 k
perl-Socket riscv64 4:2.027-1.fc27 local 95 k
perl-Storable riscv64 1:2.62-408.fc27.0.riscv64 local 205 k
perl-Term-ANSIColor noarch 4.06-408.fc27.0.riscv64 local 94 k
perl-Term-Cap noarch 1.17-408.fc27.0.riscv64 local 78 k
perl-Text-ParseWords noarch 3.30-408.fc27.0.riscv64 local 73 k
perl-Text-Tabs+Wrap noarch 2013.0523-408.fc27.0.riscv64 local 80 k
perl-Thread-Queue noarch 3.12-408.fc27.0.riscv64 local 77 k
perl-Time-Local noarch 1:1.250-394.fc27 local 30 k
perl-Unicode-Normalize riscv64 1.25-408.fc27.0.riscv64 local 164 k
perl-constant noarch 1.33-408.fc27.0.riscv64 local 79 k
perl-interpreter riscv64 4:5.26.1-408.fc28.1.riscv64 local 6.7 M
perl-libs riscv64 4:5.26.1-408.fc28.1.riscv64 local 3.3 M
perl-macros riscv64 4:5.26.1-408.fc28.1.riscv64 local 69 k
perl-parent noarch 1:0.236-408.fc27.0.riscv64 local 71 k
perl-podlators noarch 4.09-408.fc27.0.riscv64 local 157 k
perl-threads riscv64 1:2.21-1.fc27 local 104 k
perl-threads-shared riscv64 1.58-1.fc27 local 91 k
pkgconf riscv64 1.4.1-1.fc27 local 35 k
pkgconf-m4 noarch 1.4.1-1.fc27 local 15 k
pkgconf-pkg-config riscv64 1.4.1-1.fc27 local 14 k
tar riscv64 2:1.29-7.fc27 local 805 k
Transaction Summary
================================================================================
Install 53 Packages
Total download size: 20 M
Installed size: 62 M
Downloading Packages:
(1/53): libxcb-devel 0% [ ] --- B/s | 0 B --:-- ETA
(1/53): libXdmcp-devel-1.1.2-3.fc28.riscv64.rpm 257 kB/s | 15 kB 00:00
(2-3/53): libxcb-dev 0% [ ] 950 kB/s | 78 kB 00:21 ETA
(2/53): xorg-x11-util-macros-1.19.0-5.fc24.noar 477 kB/s | 54 kB 00:00
(3-4/53): libxcb-dev 0% [ ] 951 kB/s | 149 kB 00:21 ETA
(3/53): xorg-x11-xtrans-devel-1.3.5-3.fc24.noar 521 kB/s | 86 kB 00:00
(4-5/53): libxcb-dev 1% [ ] 974 kB/s | 378 kB 00:21 ETA
(4/53): libXdmcp-1.1.2-3.fc28.riscv64.rpm 669 kB/s | 48 kB 00:00
(5-6/53): libxcb-dev 2% [- ] 991 kB/s | 554 kB 00:20 ETA
(5/53): perl-Pod-Usage-1.69-408.fc27.0.riscv64. 820 kB/s | 89 kB 00:00
(6-7/53): libxcb-1.1 4% [- ] 1.0 MB/s | 835 kB 00:19 ETA
(6/53): libXau-devel-1.0.8-11.fc28.riscv64.rpm 446 kB/s | 19 kB 00:00
(7-8/53): libxcb-1.1 4% [- ] 1.0 MB/s | 917 kB 00:19 ETA
(7/53): libXau-1.0.8-11.fc28.riscv64.rpm 699 kB/s | 42 kB 00:00
(8-9/53): libxcb-1.1 5% [= ] 1.0 MB/s | 1.0 MB 00:19 ETA
(8/53): xorg-x11-proto-devel-7.7-20.fc25.noarch 927 kB/s | 287 kB 00:00
(9-10/53): libxcb-1. 9% [=- ] 1.1 MB/s | 1.9 MB 00:16 ETA
(9/53): pkgconf-pkg-config-1.4.1-1.fc27.riscv64 496 kB/s | 14 kB 00:00
(10-11/53): libxcb-1 9% [=- ] 1.1 MB/s | 1.9 MB 00:16 ETA
(10/53): pkgconf-m4-1.4.1-1.fc27.noarch.rpm 573 kB/s | 15 kB 00:00
(11-12/53): libxcb-1 9% [=- ] 1.1 MB/s | 2.0 MB 00:16 ETA
(11/53): pkgconf-1.4.1-1.fc27.riscv64.rpm 622 kB/s | 35 kB 00:00
(12-13/53): libxcb-1 10% [== ] 1.1 MB/s | 2.1 MB 00:16 ETA
(12/53): libxcb-1.12-5.0.riscv64.fc28.riscv64.r 623 kB/s | 708 kB 00:01
(13-14/53): libpkgco 10% [== ] 1.1 MB/s | 2.2 MB 00:16 ETA
(13/53): libpkgconf-1.4.1-1.fc27.riscv64.rpm 355 kB/s | 74 kB 00:00
(14-15/53): autoconf 11% [== ] 1.1 MB/s | 2.3 MB 00:16 ETA
(14/53): emacs-filesystem-25.3-5.fc28.noarch.rp 693 kB/s | 67 kB 00:00
(15-16/53): libxcb-d 12% [==- ] 1.1 MB/s | 2.5 MB 00:15 ETA
(15/53): libxcb-devel-1.12-5.0.riscv64.fc28.ris 592 kB/s | 1.0 MB 00:01
(16-17/53): autoconf 14% [==- ] 1.1 MB/s | 3.0 MB 00:15 ETA
(16-18/53): autoconf 19% [===- ] 1.3 MB/s | 3.9 MB 00:13 ETA
(16/53): autoconf-2.69-26.fc28.noarch.rpm 723 kB/s | 709 kB 00:00
(17-18/53): automake 20% [==== ] 1.3 MB/s | 4.2 MB 00:12 ETA
(17/53): automake-1.15.1-3.fc28.noarch.rpm 698 kB/s | 706 kB 00:01
(18-19/53): tar-1.29 22% [====- ] 1.3 MB/s | 4.6 MB 00:12 ETA
(18/53): perl-Carp-1.42-408.fc27.0.riscv64.noar 835 kB/s | 84 kB 00:00
(19-20/53): tar-1.29 24% [====- ] 1.3 MB/s | 4.9 MB 00:11 ETA
(19/53): libtool-2.4.6-21.fc27.riscv64.rpm 709 kB/s | 707 kB 00:00
(20-21/53): perl-Exp 24% [====- ] 1.3 MB/s | 5.0 MB 00:11 ETA
(20/53): perl-Exporter-5.72-408.fc27.0.riscv64. 410 kB/s | 87 kB 00:00
(21-22/53): perl-Get 25% [===== ] 1.3 MB/s | 5.2 MB 00:11 ETA
(21/53): perl-Getopt-Long-2.50-3.fc27.noarch.rp 521 kB/s | 61 kB 00:00
(22-23/53): perl-Pod 25% [===== ] 1.3 MB/s | 5.2 MB 00:11 ETA
(22/53): perl-Pod-Perldoc-3.28-408.fc27.0.riscv 702 kB/s | 139 kB 00:00
(23-24/53): perl-pod 27% [=====- ] 1.3 MB/s | 5.6 MB 00:11 ETA
(23/53): perl-podlators-4.09-408.fc27.0.riscv64 691 kB/s | 157 kB 00:00
(24-25/53): perl-Pat 27% [=====- ] 1.3 MB/s | 5.7 MB 00:10 ETA
(24/53): perl-PathTools-3.67-408.fc27.0.riscv64 680 kB/s | 166 kB 00:00
(25-26/53): perl-int 29% [=====- ] 1.4 MB/s | 6.1 MB 00:10 ETA
(25/53): tar-1.29-7.fc27.riscv64.rpm 609 kB/s | 805 kB 00:01
(26-27/53): perl-int 32% [====== ] 1.4 MB/s | 6.5 MB 00:10 ETA
(26/53): perl-Errno-1.28-408.fc28.1.riscv64.ris 819 kB/s | 73 kB 00:00
(27-28/53): perl-int 33% [======- ] 1.4 MB/s | 6.7 MB 00:09 ETA
(27/53): perl-File-Temp-0.230.400-408.fc27.0.ri 761 kB/s | 103 kB 00:00
(28-29/53): perl-int 34% [======- ] 1.4 MB/s | 7.1 MB 00:09 ETA
(28/53): perl-HTTP-Tiny-0.070-408.fc27.0.riscv6 794 kB/s | 97 kB 00:00
(29-30/53): perl-int 36% [======= ] 1.4 MB/s | 7.4 MB 00:08 ETA
(29/53): perl-Pod-Simple-3.35-408.fc27.0.riscv6 952 kB/s | 271 kB 00:00
(30-31/53): perl-int 40% [======== ] 1.5 MB/s | 8.2 MB 00:08 ETA
(30/53): perl-Text-ParseWords-3.30-408.fc27.0.r 732 kB/s | 73 kB 00:00
(31-32/53): perl-lib 41% [======== ] 1.5 MB/s | 8.5 MB 00:07 ETA
(31/53): perl-parent-0.236-408.fc27.0.riscv64.n 762 kB/s | 71 kB 00:00
(32-33/53): perl-lib 42% [========- ] 1.5 MB/s | 8.7 MB 00:07 ETA
(32-34/53): perl-int 46% [========= ] 1.6 MB/s | 9.5 MB 00:06 ETA
(32-34/53): perl-int 51% [========== ] 1.7 MB/s | 10 MB 00:05 ETA
(32-34/53): perl-lib 56% [=========== ] 1.8 MB/s | 11 MB 00:04 ETA
(32-34/53): perl-lib 60% [============ ] 1.9 MB/s | 12 MB 00:04 ETA
(32/53): perl-Encode-2.94-16.fc27.riscv64.rpm 934 kB/s | 1.4 MB 00:01
(33-34/53): perl-int 64% [============- ] 1.9 MB/s | 13 MB 00:03 ETA
(33/53): perl-IO-1.38-408.fc28.1.riscv64.riscv6 841 kB/s | 176 kB 00:00
(34-35/53): perl-lib 66% [============= ] 1.9 MB/s | 14 MB 00:03 ETA
(34/53): perl-Time-Local-1.250-394.fc27.noarch. 697 kB/s | 30 kB 00:00
(35-36/53): perl-lib 67% [============= ] 1.9 MB/s | 14 MB 00:03 ETA
(35/53): perl-Socket-2.027-1.fc27.riscv64.rpm 872 kB/s | 95 kB 00:00
(36-37/53): perl-lib 68% [=============- ] 1.9 MB/s | 14 MB 00:03 ETA
(36/53): perl-constant-1.33-408.fc27.0.riscv64. 840 kB/s | 79 kB 00:00
(37-38/53): perl-lib 69% [=============- ] 1.9 MB/s | 14 MB 00:03 ETA
(37/53): perl-File-Path-2.15-1.fc27.noarch.rpm 634 kB/s | 37 kB 00:00
(38-39/53): perl-lib 70% [============== ] 1.9 MB/s | 14 MB 00:03 ETA
(38/53): perl-Scalar-List-Utils-1.48-1.fc27.ris 836 kB/s | 119 kB 00:00
(39-40/53): perl-lib 72% [============== ] 1.9 MB/s | 15 MB 00:02 ETA
(39/53): perl-Thread-Queue-3.12-408.fc27.0.risc 827 kB/s | 77 kB 00:00
(40-41/53): perl-lib 73% [==============- ] 1.9 MB/s | 15 MB 00:02 ETA
(40/53): perl-threads-2.21-1.fc27.riscv64.rpm 813 kB/s | 104 kB 00:00
(41-42/53): perl-lib 74% [==============- ] 1.9 MB/s | 15 MB 00:02 ETA
(41/53): perl-libs-5.26.1-408.fc28.1.riscv64.ri 752 kB/s | 3.3 MB 00:04
(42-43/53): perl-int 77% [===============- ] 1.8 MB/s | 16 MB 00:02 ETA
(42/53): perl-Data-Dumper-2.167-408.fc27.0.risc 818 kB/s | 149 kB 00:00
(43-44/53): perl-int 80% [================ ] 1.8 MB/s | 16 MB 00:02 ETA
(43/53): m4-1.4.18-5.fc28.riscv64.rpm 418 kB/s | 369 kB 00:00
(44-45/53): perl-int 80% [================ ] 1.8 MB/s | 16 MB 00:02 ETA
(44/53): perl-Text-Tabs+Wrap-2013.0523-408.fc27 455 kB/s | 80 kB 00:00
(45-46/53): perl-int 81% [================ ] 1.8 MB/s | 17 MB 00:02 ETA
(45/53): perl-macros-5.26.1-408.fc28.1.riscv64. 780 kB/s | 69 kB 00:00
(46-47/53): perl-Uni 82% [================ ] 1.8 MB/s | 17 MB 00:02 ETA
(46/53): perl-Unicode-Normalize-1.25-408.fc27.0 597 kB/s | 164 kB 00:00
(47-48/53): perl-thr 82% [================- ] 1.8 MB/s | 17 MB 00:01 ETA
(47/53): perl-threads-shared-1.58-1.fc27.riscv6 581 kB/s | 91 kB 00:00
(48-49/53): perl-MIM 83% [================- ] 1.8 MB/s | 17 MB 00:01 ETA
(48/53): perl-MIME-Base64-3.15-408.fc27.0.riscv 595 kB/s | 111 kB 00:00
(49-50/53): perl-Sto 84% [================- ] 1.8 MB/s | 17 MB 00:01 ETA
(49/53): perl-Term-ANSIColor-4.06-408.fc27.0.ri 721 kB/s | 94 kB 00:00
(50-51/53): perl-Sto 86% [================= ] 1.8 MB/s | 18 MB 00:01 ETA
(50/53): perl-Storable-2.62-408.fc27.0.riscv64. 598 kB/s | 205 kB 00:00
(51-52/53): perl-Ter 86% [================= ] 1.8 MB/s | 18 MB 00:01 ETA
(51/53): perl-Term-Cap-1.17-408.fc27.0.riscv64. 507 kB/s | 78 kB 00:00
(52-53/53): perl-Pod 87% [================= ] 1.8 MB/s | 18 MB 00:01 ETA
(52/53): perl-Pod-Escapes-1.07-408.fc27.0.riscv 681 kB/s | 77 kB 00:00
(53/53): perl-interp 87% [=================- ] 1.8 MB/s | 18 MB 00:01 ETA
(53/53): perl-interp 92% [================== ] 1.8 MB/s | 19 MB 00:00 ETA
(53/53): perl-interp 96% [=================== ] 1.9 MB/s | 20 MB 00:00 ETA
(53/53): perl-interpreter-5.26.1-408.fc28.1.ris 915 kB/s | 6.7 MB 00:07
--------------------------------------------------------------------------------
Total 1.8 MB/s | 20 MB 00:11
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing : [ ] 1/1
Preparing : [= ] 1/1
Preparing : [== ] 1/1
Preparing : [=== ] 1/1
Preparing : [==== ] 1/1
Preparing : [===== ] 1/1
Preparing : [====== ] 1/1
Preparing : [======= ] 1/1
Preparing : [======== ] 1/1
Preparing : [========= ] 1/1
Preparing : [========== ] 1/1
Preparing : [=========== ] 1/1
Preparing : [============ ] 1/1
Preparing : [============= ] 1/1
Preparing : [============== ] 1/1
Preparing : [=============== ] 1/1
Preparing : [================ ] 1/1
Preparing : [================= ] 1/1
Preparing : [================== ] 1/1
Preparing : [=================== ] 1/1
Preparing : [==================== ] 1/1
Preparing : [===================== ] 1/1
Preparing : [====================== ] 1/1
Preparing : [======================= ] 1/1
Preparing : [======================== ] 1/1
Preparing : [========================= ] 1/1
Preparing : [========================== ] 1/1
Preparing : [=========================== ] 1/1
Preparing : [============================ ] 1/1
Preparing : [============================= ] 1/1
Preparing : [============================== ] 1/1
Preparing : [=============================== ] 1/1
Preparing : [================================ ] 1/1
Preparing : [================================= ] 1/1
Preparing : [================================== ] 1/1
Preparing : [=================================== ] 1/1
Preparing : [==================================== ] 1/1
Preparing : [===================================== ] 1/1
Preparing : [====================================== ] 1/1
Preparing : [======================================= ] 1/1
Preparing : [======================================== ] 1/1
Preparing : [========================================= ] 1/1
Preparing : [========================================== ] 1/1
Preparing : [=========================================== ] 1/1
Preparing : [============================================ ] 1/1
Preparing : [============================================= ] 1/1
Preparing : [============================================== ] 1/1
Preparing : [=============================================== ] 1/1
Preparing : [================================================ ] 1/1
Preparing : [================================================= ] 1/1
Preparing : 1/1
Installing : perl-Exporter-5.72-408.f [ ] 1/53
Installing : perl-Exporter-5.72-408.f [===== ] 1/53
Installing : perl-Exporter-5.72-408.f [======= ] 1/53
Installing : perl-Exporter-5.72-408.f [==================== ] 1/53
Installing : perl-Exporter-5.72-408.f [======================== ] 1/53
Installing : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 1/53
Installing : perl-libs-4:5.26.1-408.f [ ] 2/53
Installing : perl-libs-4:5.26.1-408.f [= ] 2/53
Installing : perl-libs-4:5.26.1-408.f [== ] 2/53
Installing : perl-libs-4:5.26.1-408.f [=== ] 2/53
Installing : perl-libs-4:5.26.1-408.f [==== ] 2/53
Installing : perl-libs-4:5.26.1-408.f [===== ] 2/53
Installing : perl-libs-4:5.26.1-408.f [====== ] 2/53
Installing : perl-libs-4:5.26.1-408.f [======= ] 2/53
Installing : perl-libs-4:5.26.1-408.f [======== ] 2/53
Installing : perl-libs-4:5.26.1-408.f [========= ] 2/53
Installing : perl-libs-4:5.26.1-408.f [========== ] 2/53
Installing : perl-libs-4:5.26.1-408.f [=========== ] 2/53
Installing : perl-libs-4:5.26.1-408.f [============ ] 2/53
Installing : perl-libs-4:5.26.1-408.f [============= ] 2/53
Installing : perl-libs-4:5.26.1-408.f [============== ] 2/53
Installing : perl-libs-4:5.26.1-408.f [=============== ] 2/53
Installing : perl-libs-4:5.26.1-408.f [================ ] 2/53
Installing : perl-libs-4:5.26.1-408.f [================= ] 2/53
Installing : perl-libs-4:5.26.1-408.f [================== ] 2/53
Installing : perl-libs-4:5.26.1-408.f [=================== ] 2/53
Installing : perl-libs-4:5.26.1-408.f [==================== ] 2/53
Installing : perl-libs-4:5.26.1-408.f [===================== ] 2/53
Installing : perl-libs-4:5.26.1-408.f [====================== ] 2/53
Installing : perl-libs-4:5.26.1-408.f [======================= ] 2/53
Installing : perl-libs-4:5.26.1-408.f [======================== ] 2/53
Installing : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 2/53
Installing : perl-Carp-1.42-408.fc27. [ ] 3/53
Installing : perl-Carp-1.42-408.fc27. [==== ] 3/53
Installing : perl-Carp-1.42-408.fc27. [======================== ] 3/53
Installing : perl-Carp-1.42-408.fc27.0.riscv64.noarch 3/53
Installing : perl-Scalar-List-Utils-3 [ ] 4/53
Installing : perl-Scalar-List-Utils-3 [= ] 4/53
Installing : perl-Scalar-List-Utils-3 [== ] 4/53
Installing : perl-Scalar-List-Utils-3 [=== ] 4/53
Installing : perl-Scalar-List-Utils-3 [===== ] 4/53
Installing : perl-Scalar-List-Utils-3 [======== ] 4/53
Installing : perl-Scalar-List-Utils-3 [========== ] 4/53
Installing : perl-Scalar-List-Utils-3 [============= ] 4/53
Installing : perl-Scalar-List-Utils-3 [================ ] 4/53
Installing : perl-Scalar-List-Utils-3 [================== ] 4/53
Installing : perl-Scalar-List-Utils-3 [===================== ] 4/53
Installing : perl-Scalar-List-Utils-3 [====================== ] 4/53
Installing : perl-Scalar-List-Utils-3 [======================= ] 4/53
Installing : perl-Scalar-List-Utils-3 [======================== ] 4/53
Installing : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 4/53
Installing : perl-Text-ParseWords-3.3 [ ] 5/53
Installing : perl-Text-ParseWords-3.3 [======= ] 5/53
Installing : perl-Text-ParseWords-3.3 [======================== ] 5/53
Installing : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 5/53
Installing : libXau-1.0.8-11.fc28.ris [ ] 6/53random: crng init done
Installing : libXau-1.0.8-11.fc28.ris [========= ] 6/53
Installing : libXau-1.0.8-11.fc28.ris [============= ] 6/53
Installing : libXau-1.0.8-11.fc28.ris [====================== ] 6/53
Installing : libXau-1.0.8-11.fc28.ris [======================== ] 6/53
Installing : libXau-1.0.8-11.fc28.riscv64 6/53
Running scriptlet: libXau-1.0.8-11.fc28.riscv64 6/53
Installing : libxcb-1.12-5.0.riscv64. [ ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [= ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [== ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [=== ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [==== ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [===== ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [====== ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [======= ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [======== ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [========= ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [========== ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [=========== ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [============ ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [============= ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [============== ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [=============== ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [================ ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [================= ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [================== ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [=================== ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [==================== ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [===================== ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [====================== ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [======================= ] 7/53
Installing : libxcb-1.12-5.0.riscv64. [======================== ] 7/53
Installing : libxcb-1.12-5.0.riscv64.fc28.riscv64 7/53
Running scriptlet: libxcb-1.12-5.0.riscv64.fc28.riscv64 7/53
Installing : perl-Term-ANSIColor-4.06 [ ] 8/53
Installing : perl-Term-ANSIColor-4.06 [==== ] 8/53
Installing : perl-Term-ANSIColor-4.06 [================== ] 8/53
Installing : perl-Term-ANSIColor-4.06 [======================== ] 8/53
Installing : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 8/53
Installing : perl-macros-4:5.26.1-408 [ ] 9/53
Installing : perl-macros-4:5.26.1-408 [======================== ] 9/53
Installing : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 9/53
Installing : perl-Errno-1.28-408.fc28 [ ] 10/53
Installing : perl-Errno-1.28-408.fc28 [================= ] 10/53
Installing : perl-Errno-1.28-408.fc28 [======================== ] 10/53
Installing : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 10/53
Installing : perl-parent-1:0.236-408. [ ] 11/53
Installing : perl-parent-1:0.236-408. [============ ] 11/53
Installing : perl-parent-1:0.236-408. [======================== ] 11/53
Installing : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 11/53
Installing : perl-Socket-4:2.027-1.fc [ ] 12/53
Installing : perl-Socket-4:2.027-1.fc [=== ] 12/53
Installing : perl-Socket-4:2.027-1.fc [======= ] 12/53
Installing : perl-Socket-4:2.027-1.fc [========== ] 12/53
Installing : perl-Socket-4:2.027-1.fc [============== ] 12/53
Installing : perl-Socket-4:2.027-1.fc [================= ] 12/53
Installing : perl-Socket-4:2.027-1.fc [==================== ] 12/53
Installing : perl-Socket-4:2.027-1.fc [===================== ] 12/53
Installing : perl-Socket-4:2.027-1.fc [====================== ] 12/53
Installing : perl-Socket-4:2.027-1.fc [======================= ] 12/53
Installing : perl-Socket-4:2.027-1.fc [======================== ] 12/53
Installing : perl-Socket-4:2.027-1.fc27.riscv64 12/53
Installing : perl-IO-1.38-408.fc28.1. [ ] 13/53
Installing : perl-IO-1.38-408.fc28.1. [= ] 13/53
Installing : perl-IO-1.38-408.fc28.1. [== ] 13/53
Installing : perl-IO-1.38-408.fc28.1. [=== ] 13/53
Installing : perl-IO-1.38-408.fc28.1. [==== ] 13/53
Installing : perl-IO-1.38-408.fc28.1. [===== ] 13/53
Installing : perl-IO-1.38-408.fc28.1. [====== ] 13/53
Installing : perl-IO-1.38-408.fc28.1. [======= ] 13/53
Installing : perl-IO-1.38-408.fc28.1. [======== ] 13/53
Installing : perl-IO-1.38-408.fc28.1. [=========== ] 13/53
Installing : perl-IO-1.38-408.fc28.1. [============== ] 13/53
Installing : perl-IO-1.38-408.fc28.1. [================= ] 13/53
Installing : perl-IO-1.38-408.fc28.1. [==================== ] 13/53
Installing : perl-IO-1.38-408.fc28.1. [===================== ] 13/53
Installing : perl-IO-1.38-408.fc28.1. [====================== ] 13/53
Installing : perl-IO-1.38-408.fc28.1. [======================= ] 13/53
Installing : perl-IO-1.38-408.fc28.1. [======================== ] 13/53
Installing : perl-IO-1.38-408.fc28.1.riscv64.riscv64 13/53
Installing : perl-PathTools-3.67-408. [ ] 14/53
Installing : perl-PathTools-3.67-408. [== ] 14/53
Installing : perl-PathTools-3.67-408. [=== ] 14/53
Installing : perl-PathTools-3.67-408. [==== ] 14/53
Installing : perl-PathTools-3.67-408. [======= ] 14/53
Installing : perl-PathTools-3.67-408. [========= ] 14/53
Installing : perl-PathTools-3.67-408. [=========== ] 14/53
Installing : perl-PathTools-3.67-408. [============== ] 14/53
Installing : perl-PathTools-3.67-408. [================== ] 14/53
Installing : perl-PathTools-3.67-408. [==================== ] 14/53
Installing : perl-PathTools-3.67-408. [===================== ] 14/53
Installing : perl-PathTools-3.67-408. [====================== ] 14/53
Installing : perl-PathTools-3.67-408. [======================= ] 14/53
Installing : perl-PathTools-3.67-408. [======================== ] 14/53
Installing : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 14/53
Installing : perl-constant-1.33-408.f [ ] 15/53
Installing : perl-constant-1.33-408.f [======= ] 15/53
Installing : perl-constant-1.33-408.f [======================== ] 15/53
Installing : perl-constant-1.33-408.fc27.0.riscv64.noarch 15/53
Installing : perl-File-Path-2.15-1.fc [ ] 16/53
Installing : perl-File-Path-2.15-1.fc [==== ] 16/53
Installing : perl-File-Path-2.15-1.fc [======== ] 16/53
Installing : perl-File-Path-2.15-1.fc [==================== ] 16/53
Installing : perl-File-Path-2.15-1.fc [======================== ] 16/53
Installing : perl-File-Path-2.15-1.fc27.noarch 16/53
Installing : perl-threads-1:2.21-1.fc [ ] 17/53
Installing : perl-threads-1:2.21-1.fc [=== ] 17/53
Installing : perl-threads-1:2.21-1.fc [====== ] 17/53
Installing : perl-threads-1:2.21-1.fc [========= ] 17/53
Installing : perl-threads-1:2.21-1.fc [============= ] 17/53
Installing : perl-threads-1:2.21-1.fc [================ ] 17/53
Installing : perl-threads-1:2.21-1.fc [================== ] 17/53
Installing : perl-threads-1:2.21-1.fc [===================== ] 17/53
Installing : perl-threads-1:2.21-1.fc [====================== ] 17/53
Installing : perl-threads-1:2.21-1.fc [======================= ] 17/53
Installing : perl-threads-1:2.21-1.fc [======================== ] 17/53
Installing : perl-threads-1:2.21-1.fc27.riscv64 17/53
Installing : perl-threads-shared-1.58 [ ] 18/53
Installing : perl-threads-shared-1.58 [=== ] 18/53
Installing : perl-threads-shared-1.58 [======= ] 18/53
Installing : perl-threads-shared-1.58 [========== ] 18/53
Installing : perl-threads-shared-1.58 [============== ] 18/53
Installing : perl-threads-shared-1.58 [================= ] 18/53
Installing : perl-threads-shared-1.58 [==================== ] 18/53
Installing : perl-threads-shared-1.58 [======================= ] 18/53
Installing : perl-threads-shared-1.58 [======================== ] 18/53
Installing : perl-threads-shared-1.58-1.fc27.riscv64 18/53
Installing : perl-Text-Tabs+Wrap-2013 [ ] 19/53
Installing : perl-Text-Tabs+Wrap-2013 [=== ] 19/53
Installing : perl-Text-Tabs+Wrap-2013 [======== ] 19/53
Installing : perl-Text-Tabs+Wrap-2013 [========= ] 19/53
Installing : perl-Text-Tabs+Wrap-2013 [============== ] 19/53
Installing : perl-Text-Tabs+Wrap-2013 [======================== ] 19/53
Installing : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 19/53
Installing : perl-Unicode-Normalize-1 [ ] 20/53
Installing : perl-Unicode-Normalize-1 [= ] 20/53
Installing : perl-Unicode-Normalize-1 [== ] 20/53
Installing : perl-Unicode-Normalize-1 [=== ] 20/53
Installing : perl-Unicode-Normalize-1 [==== ] 20/53
Installing : perl-Unicode-Normalize-1 [===== ] 20/53
Installing : perl-Unicode-Normalize-1 [====== ] 20/53
Installing : perl-Unicode-Normalize-1 [======= ] 20/53
Installing : perl-Unicode-Normalize-1 [======== ] 20/53
Installing : perl-Unicode-Normalize-1 [========= ] 20/53
Installing : perl-Unicode-Normalize-1 [========== ] 20/53
Installing : perl-Unicode-Normalize-1 [============ ] 20/53
Installing : perl-Unicode-Normalize-1 [============= ] 20/53
Installing : perl-Unicode-Normalize-1 [============== ] 20/53
Installing : perl-Unicode-Normalize-1 [=============== ] 20/53
Installing : perl-Unicode-Normalize-1 [================ ] 20/53
Installing : perl-Unicode-Normalize-1 [================= ] 20/53
Installing : perl-Unicode-Normalize-1 [================== ] 20/53
Installing : perl-Unicode-Normalize-1 [=================== ] 20/53
Installing : perl-Unicode-Normalize-1 [==================== ] 20/53
Installing : perl-Unicode-Normalize-1 [===================== ] 20/53
Installing : perl-Unicode-Normalize-1 [====================== ] 20/53
Installing : perl-Unicode-Normalize-1 [======================= ] 20/53
Installing : perl-Unicode-Normalize-1 [======================== ] 20/53
Installing : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 20/53
Installing : perl-interpreter-4:5.26. [ ] 21/53
Installing : perl-interpreter-4:5.26. [= ] 21/53
Installing : perl-interpreter-4:5.26. [== ] 21/53
Installing : perl-interpreter-4:5.26. [=== ] 21/53
Installing : perl-interpreter-4:5.26. [==== ] 21/53
Installing : perl-interpreter-4:5.26. [===== ] 21/53
Installing : perl-interpreter-4:5.26. [====== ] 21/53
Installing : perl-interpreter-4:5.26. [======= ] 21/53
Installing : perl-interpreter-4:5.26. [======== ] 21/53
Installing : perl-interpreter-4:5.26. [========= ] 21/53
Installing : perl-interpreter-4:5.26. [========== ] 21/53
Installing : perl-interpreter-4:5.26. [=========== ] 21/53
Installing : perl-interpreter-4:5.26. [============ ] 21/53
Installing : perl-interpreter-4:5.26. [============= ] 21/53
Installing : perl-interpreter-4:5.26. [============== ] 21/53
Installing : perl-interpreter-4:5.26. [=============== ] 21/53
Installing : perl-interpreter-4:5.26. [================ ] 21/53
Installing : perl-interpreter-4:5.26. [================= ] 21/53
Installing : perl-interpreter-4:5.26. [================== ] 21/53
Installing : perl-interpreter-4:5.26. [=================== ] 21/53
Installing : perl-interpreter-4:5.26. [==================== ] 21/53
Installing : perl-interpreter-4:5.26. [===================== ] 21/53
Installing : perl-interpreter-4:5.26. [====================== ] 21/53
Installing : perl-interpreter-4:5.26. [======================= ] 21/53
Installing : perl-interpreter-4:5.26. [======================== ] 21/53
Installing : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 21/53
Installing : perl-File-Temp-0.230.400 [ ] 22/53
Installing : perl-File-Temp-0.230.400 [=== ] 22/53
Installing : perl-File-Temp-0.230.400 [============ ] 22/53
Installing : perl-File-Temp-0.230.400 [===================== ] 22/53
Installing : perl-File-Temp-0.230.400 [======================== ] 22/53
Installing : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 22/53
Installing : perl-MIME-Base64-3.15-40 [ ] 23/53
Installing : perl-MIME-Base64-3.15-40 [= ] 23/53
Installing : perl-MIME-Base64-3.15-40 [== ] 23/53
Installing : perl-MIME-Base64-3.15-40 [========== ] 23/53
Installing : perl-MIME-Base64-3.15-40 [================== ] 23/53
Installing : perl-MIME-Base64-3.15-40 [======================= ] 23/53
Installing : perl-MIME-Base64-3.15-40 [======================== ] 23/53
Installing : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 23/53
Installing : perl-Storable-1:2.62-408 [ ] 24/53
Installing : perl-Storable-1:2.62-408 [== ] 24/53
Installing : perl-Storable-1:2.62-408 [==== ] 24/53
Installing : perl-Storable-1:2.62-408 [====== ] 24/53
Installing : perl-Storable-1:2.62-408 [======== ] 24/53
Installing : perl-Storable-1:2.62-408 [========== ] 24/53
Installing : perl-Storable-1:2.62-408 [============ ] 24/53
Installing : perl-Storable-1:2.62-408 [============== ] 24/53
Installing : perl-Storable-1:2.62-408 [================ ] 24/53
Installing : perl-Storable-1:2.62-408 [================== ] 24/53
Installing : perl-Storable-1:2.62-408 [==================== ] 24/53
Installing : perl-Storable-1:2.62-408 [====================== ] 24/53
Installing : perl-Storable-1:2.62-408 [======================== ] 24/53
Installing : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 24/53
Installing : perl-Term-Cap-1.17-408.f [ ] 25/53
Installing : perl-Term-Cap-1.17-408.f [==== ] 25/53
Installing : perl-Term-Cap-1.17-408.f [======================== ] 25/53
Installing : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 25/53
Installing : perl-Pod-Escapes-1:1.07- [ ] 26/53
Installing : perl-Pod-Escapes-1:1.07- [==== ] 26/53
Installing : perl-Pod-Escapes-1:1.07- [======================== ] 26/53
Installing : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 26/53
Installing : perl-Thread-Queue-3.12-4 [ ] 27/53
Installing : perl-Thread-Queue-3.12-4 [===== ] 27/53
Installing : perl-Thread-Queue-3.12-4 [====== ] 27/53
Installing : perl-Thread-Queue-3.12-4 [======================== ] 27/53
Installing : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 27/53
Installing : perl-Time-Local-1:1.250- [ ] 28/53
Installing : perl-Time-Local-1:1.250- [= ] 28/53
Installing : perl-Time-Local-1:1.250- [===== ] 28/53
Installing : perl-Time-Local-1:1.250- [======== ] 28/53
Installing : perl-Time-Local-1:1.250- [========= ] 28/53
Installing : perl-Time-Local-1:1.250- [================= ] 28/53
Installing : perl-Time-Local-1:1.250- [=================== ] 28/53
Installing : perl-Time-Local-1:1.250- [======================== ] 28/53
Installing : perl-Time-Local-1:1.250-394.fc27.noarch 28/53
Installing : perl-HTTP-Tiny-0.070-408 [ ] 29/53
Installing : perl-HTTP-Tiny-0.070-408 [== ] 29/53
Installing : perl-HTTP-Tiny-0.070-408 [============ ] 29/53
Installing : perl-HTTP-Tiny-0.070-408 [===================== ] 29/53
Installing : perl-HTTP-Tiny-0.070-408 [======================== ] 29/53
Installing : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 29/53
Installing : perl-Pod-Simple-1:3.35-4 [ ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [= ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [== ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [=== ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [==== ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [====== ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [======= ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [========= ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [========== ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [=========== ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [============ ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [============= ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [=============== ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [================ ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [================= ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [================== ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [=================== ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [==================== ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [===================== ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [====================== ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [======================= ] 30/53
Installing : perl-Pod-Simple-1:3.35-4 [======================== ] 30/53
Installing : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 30/53
Installing : perl-Encode-4:2.94-16.fc [ ] 31/53
Installing : perl-Encode-4:2.94-16.fc [= ] 31/53
Installing : perl-Encode-4:2.94-16.fc [== ] 31/53
Installing : perl-Encode-4:2.94-16.fc [=== ] 31/53
Installing : perl-Encode-4:2.94-16.fc [==== ] 31/53
Installing : perl-Encode-4:2.94-16.fc [===== ] 31/53
Installing : perl-Encode-4:2.94-16.fc [====== ] 31/53
Installing : perl-Encode-4:2.94-16.fc [======= ] 31/53
Installing : perl-Encode-4:2.94-16.fc [======== ] 31/53
Installing : perl-Encode-4:2.94-16.fc [========= ] 31/53
Installing : perl-Encode-4:2.94-16.fc [========== ] 31/53
Installing : perl-Encode-4:2.94-16.fc [=========== ] 31/53
Installing : perl-Encode-4:2.94-16.fc [============ ] 31/53
Installing : perl-Encode-4:2.94-16.fc [============= ] 31/53
Installing : perl-Encode-4:2.94-16.fc [============== ] 31/53
Installing : perl-Encode-4:2.94-16.fc [=============== ] 31/53
Installing : perl-Encode-4:2.94-16.fc [================ ] 31/53
Installing : perl-Encode-4:2.94-16.fc [================= ] 31/53
Installing : perl-Encode-4:2.94-16.fc [================== ] 31/53
Installing : perl-Encode-4:2.94-16.fc [=================== ] 31/53
Installing : perl-Encode-4:2.94-16.fc [==================== ] 31/53
Installing : perl-Encode-4:2.94-16.fc [===================== ] 31/53
Installing : perl-Encode-4:2.94-16.fc [====================== ] 31/53
Installing : perl-Encode-4:2.94-16.fc [======================= ] 31/53
Installing : perl-Encode-4:2.94-16.fc [======================== ] 31/53
Installing : perl-Encode-4:2.94-16.fc27.riscv64 31/53
Installing : perl-Getopt-Long-1:2.50- [ ] 32/53
Installing : perl-Getopt-Long-1:2.50- [=== ] 32/53
Installing : perl-Getopt-Long-1:2.50- [==== ] 32/53
Installing : perl-Getopt-Long-1:2.50- [===== ] 32/53
Installing : perl-Getopt-Long-1:2.50- [====== ] 32/53
Installing : perl-Getopt-Long-1:2.50- [======= ] 32/53
Installing : perl-Getopt-Long-1:2.50- [========= ] 32/53
Installing : perl-Getopt-Long-1:2.50- [=============== ] 32/53
Installing : perl-Getopt-Long-1:2.50- [===================== ] 32/53
Installing : perl-Getopt-Long-1:2.50- [======================== ] 32/53
Installing : perl-Getopt-Long-1:2.50-3.fc27.noarch 32/53
Installing : perl-Pod-Perldoc-3.28-40 [ ] 33/53
Installing : perl-Pod-Perldoc-3.28-40 [= ] 33/53
Installing : perl-Pod-Perldoc-3.28-40 [== ] 33/53
Installing : perl-Pod-Perldoc-3.28-40 [=== ] 33/53
Installing : perl-Pod-Perldoc-3.28-40 [==== ] 33/53
Installing : perl-Pod-Perldoc-3.28-40 [===== ] 33/53
Installing : perl-Pod-Perldoc-3.28-40 [====== ] 33/53
Installing : perl-Pod-Perldoc-3.28-40 [=========== ] 33/53
Installing : perl-Pod-Perldoc-3.28-40 [================ ] 33/53
Installing : perl-Pod-Perldoc-3.28-40 [================= ] 33/53
Installing : perl-Pod-Perldoc-3.28-40 [================== ] 33/53
Installing : perl-Pod-Perldoc-3.28-40 [==================== ] 33/53
Installing : perl-Pod-Perldoc-3.28-40 [===================== ] 33/53
Installing : perl-Pod-Perldoc-3.28-40 [====================== ] 33/53
Installing : perl-Pod-Perldoc-3.28-40 [======================= ] 33/53
Installing : perl-Pod-Perldoc-3.28-40 [======================== ] 33/53
Installing : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 33/53
Installing : perl-podlators-4.09-408. [ ] 34/53
Installing : perl-podlators-4.09-408. [= ] 34/53
Installing : perl-podlators-4.09-408. [== ] 34/53
Installing : perl-podlators-4.09-408. [=== ] 34/53
Installing : perl-podlators-4.09-408. [==== ] 34/53
Installing : perl-podlators-4.09-408. [===== ] 34/53
Installing : perl-podlators-4.09-408. [====== ] 34/53
Installing : perl-podlators-4.09-408. [======= ] 34/53
Installing : perl-podlators-4.09-408. [=========== ] 34/53
Installing : perl-podlators-4.09-408. [=============== ] 34/53
Installing : perl-podlators-4.09-408. [================ ] 34/53
Installing : perl-podlators-4.09-408. [================= ] 34/53
Installing : perl-podlators-4.09-408. [===================== ] 34/53
Installing : perl-podlators-4.09-408. [====================== ] 34/53
Installing : perl-podlators-4.09-408. [======================= ] 34/53
Installing : perl-podlators-4.09-408. [======================== ] 34/53
Installing : perl-podlators-4.09-408.fc27.0.riscv64.noarch 34/53
Installing : perl-Pod-Usage-4:1.69-40 [ ] 35/53
Installing : perl-Pod-Usage-4:1.69-40 [== ] 35/53
Installing : perl-Pod-Usage-4:1.69-40 [=== ] 35/53
Installing : perl-Pod-Usage-4:1.69-40 [======== ] 35/53
Installing : perl-Pod-Usage-4:1.69-40 [======================== ] 35/53
Installing : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 35/53
Installing : perl-Data-Dumper-2.167-4 [ ] 36/53
Installing : perl-Data-Dumper-2.167-4 [=== ] 36/53
Installing : perl-Data-Dumper-2.167-4 [==== ] 36/53
Installing : perl-Data-Dumper-2.167-4 [======== ] 36/53
Installing : perl-Data-Dumper-2.167-4 [============ ] 36/53
Installing : perl-Data-Dumper-2.167-4 [=============== ] 36/53
Installing : perl-Data-Dumper-2.167-4 [=================== ] 36/53
Installing : perl-Data-Dumper-2.167-4 [====================== ] 36/53
Installing : perl-Data-Dumper-2.167-4 [======================= ] 36/53
Installing : perl-Data-Dumper-2.167-4 [======================== ] 36/53
Installing : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 36/53
Installing : m4-1.4.18-5.fc28.riscv64 [ ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [= ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [== ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [=== ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [==== ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [===== ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [====== ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [======= ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [======== ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [========= ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [========== ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [=========== ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [============ ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [============= ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [============== ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [=============== ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [================ ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [================= ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [================== ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [=================== ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [==================== ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [===================== ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [====================== ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [======================= ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 [======================== ] 37/53
Installing : m4-1.4.18-5.fc28.riscv64 37/53
Running scriptlet: m4-1.4.18-5.fc28.riscv64 37/53
Installing : tar-2:1.29-7.fc27.riscv6 [ ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [= ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [== ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [=== ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [==== ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [===== ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [====== ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [======= ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [======== ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [========= ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [========== ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [=========== ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [============ ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [============= ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [============== ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [=============== ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [================ ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [================= ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [================== ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [=================== ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [==================== ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [===================== ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [====================== ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [======================= ] 38/53
Installing : tar-2:1.29-7.fc27.riscv6 [======================== ] 38/53
Installing : tar-2:1.29-7.fc27.riscv64 38/53
Running scriptlet: tar-2:1.29-7.fc27.riscv64 38/53
Installing : emacs-filesystem-1:25.3- [ ] 39/53
Installing : emacs-filesystem-1:25.3- [===== ] 39/53
Installing : emacs-filesystem-1:25.3- [============ ] 39/53
Installing : emacs-filesystem-1:25.3- [=================== ] 39/53
Installing : emacs-filesystem-1:25.3-5.fc28.noarch 39/53
Installing : autoconf-2.69-26.fc28.no [ ] 40/53
Installing : autoconf-2.69-26.fc28.no [= ] 40/53
Installing : autoconf-2.69-26.fc28.no [== ] 40/53
Installing : autoconf-2.69-26.fc28.no [=== ] 40/53
Installing : autoconf-2.69-26.fc28.no [==== ] 40/53
Installing : autoconf-2.69-26.fc28.no [===== ] 40/53
Installing : autoconf-2.69-26.fc28.no [====== ] 40/53
Installing : autoconf-2.69-26.fc28.no [======= ] 40/53
Installing : autoconf-2.69-26.fc28.no [======== ] 40/53
Installing : autoconf-2.69-26.fc28.no [========= ] 40/53
Installing : autoconf-2.69-26.fc28.no [========== ] 40/53
Installing : autoconf-2.69-26.fc28.no [=========== ] 40/53
Installing : autoconf-2.69-26.fc28.no [============ ] 40/53
Installing : autoconf-2.69-26.fc28.no [============= ] 40/53
Installing : autoconf-2.69-26.fc28.no [============== ] 40/53
Installing : autoconf-2.69-26.fc28.no [=============== ] 40/53
Installing : autoconf-2.69-26.fc28.no [================ ] 40/53
Installing : autoconf-2.69-26.fc28.no [================= ] 40/53
Installing : autoconf-2.69-26.fc28.no [================== ] 40/53
Installing : autoconf-2.69-26.fc28.no [=================== ] 40/53
Installing : autoconf-2.69-26.fc28.no [==================== ] 40/53
Installing : autoconf-2.69-26.fc28.no [===================== ] 40/53
Installing : autoconf-2.69-26.fc28.no [====================== ] 40/53
Installing : autoconf-2.69-26.fc28.no [======================= ] 40/53
Installing : autoconf-2.69-26.fc28.no [======================== ] 40/53
Installing : autoconf-2.69-26.fc28.noarch 40/53
Running scriptlet: autoconf-2.69-26.fc28.noarch 40/53
Installing : automake-1.15.1-3.fc28.n [ ] 41/53
Installing : automake-1.15.1-3.fc28.n [= ] 41/53
Installing : automake-1.15.1-3.fc28.n [== ] 41/53
Installing : automake-1.15.1-3.fc28.n [=== ] 41/53
Installing : automake-1.15.1-3.fc28.n [==== ] 41/53
Installing : automake-1.15.1-3.fc28.n [===== ] 41/53
Installing : automake-1.15.1-3.fc28.n [====== ] 41/53
Installing : automake-1.15.1-3.fc28.n [======= ] 41/53
Installing : automake-1.15.1-3.fc28.n [======== ] 41/53
Installing : automake-1.15.1-3.fc28.n [========= ] 41/53
Installing : automake-1.15.1-3.fc28.n [========== ] 41/53
Installing : automake-1.15.1-3.fc28.n [=========== ] 41/53
Installing : automake-1.15.1-3.fc28.n [============ ] 41/53
Installing : automake-1.15.1-3.fc28.n [============= ] 41/53
Installing : automake-1.15.1-3.fc28.n [============== ] 41/53
Installing : automake-1.15.1-3.fc28.n [=============== ] 41/53
Installing : automake-1.15.1-3.fc28.n [================ ] 41/53
Installing : automake-1.15.1-3.fc28.n [================= ] 41/53
Installing : automake-1.15.1-3.fc28.n [================== ] 41/53
Installing : automake-1.15.1-3.fc28.n [=================== ] 41/53
Installing : automake-1.15.1-3.fc28.n [==================== ] 41/53
Installing : automake-1.15.1-3.fc28.n [===================== ] 41/53
Installing : automake-1.15.1-3.fc28.n [====================== ] 41/53
Installing : automake-1.15.1-3.fc28.n [======================= ] 41/53
Installing : automake-1.15.1-3.fc28.n [======================== ] 41/53
Installing : automake-1.15.1-3.fc28.noarch 41/53
Running scriptlet: automake-1.15.1-3.fc28.noarch 41/53
Installing : libtool-2.4.6-21.fc27.ri [ ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [= ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [== ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [=== ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [==== ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [===== ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [====== ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [======= ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [======== ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [========= ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [========== ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [=========== ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [============ ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [============= ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [============== ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [=============== ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [================ ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [================= ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [================== ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [=================== ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [==================== ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [===================== ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [====================== ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [======================= ] 42/53
Installing : libtool-2.4.6-21.fc27.ri [======================== ] 42/53
Installing : libtool-2.4.6-21.fc27.riscv64 42/53
Running scriptlet: libtool-2.4.6-21.fc27.riscv64 42/53
Installing : libpkgconf-1.4.1-1.fc27. [ ] 43/53
Installing : libpkgconf-1.4.1-1.fc27. [=== ] 43/53
Installing : libpkgconf-1.4.1-1.fc27. [======= ] 43/53
Installing : libpkgconf-1.4.1-1.fc27. [=========== ] 43/53
Installing : libpkgconf-1.4.1-1.fc27. [============== ] 43/53
Installing : libpkgconf-1.4.1-1.fc27. [================== ] 43/53
Installing : libpkgconf-1.4.1-1.fc27. [====================== ] 43/53
Installing : libpkgconf-1.4.1-1.fc27. [======================== ] 43/53
Installing : libpkgconf-1.4.1-1.fc27.riscv64 43/53
Running scriptlet: libpkgconf-1.4.1-1.fc27.riscv64 43/53
Installing : pkgconf-1.4.1-1.fc27.ris [ ] 44/53
Installing : pkgconf-1.4.1-1.fc27.ris [============= ] 44/53
Installing : pkgconf-1.4.1-1.fc27.ris [=============== ] 44/53
Installing : pkgconf-1.4.1-1.fc27.ris [==================== ] 44/53
Installing : pkgconf-1.4.1-1.fc27.ris [====================== ] 44/53
Installing : pkgconf-1.4.1-1.fc27.ris [======================== ] 44/53
Installing : pkgconf-1.4.1-1.fc27.riscv64 44/53
Installing : pkgconf-m4-1.4.1-1.fc27. [ ] 45/53
Installing : pkgconf-m4-1.4.1-1.fc27. [===================== ] 45/53
Installing : pkgconf-m4-1.4.1-1.fc27. [======================== ] 45/53
Installing : pkgconf-m4-1.4.1-1.fc27.noarch 45/53
Installing : pkgconf-pkg-config-1.4.1 [ ] 46/53
Installing : pkgconf-pkg-config-1.4.1 [==== ] 46/53
Installing : pkgconf-pkg-config-1.4.1 [===== ] 46/53
Installing : pkgconf-pkg-config-1.4.1 [======================= ] 46/53
Installing : pkgconf-pkg-config-1.4.1 [======================== ] 46/53
Installing : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 46/53
Installing : xorg-x11-proto-devel-7.7 [ ] 47/53
Installing : xorg-x11-proto-devel-7.7 [= ] 47/53
Installing : xorg-x11-proto-devel-7.7 [== ] 47/53
Installing : xorg-x11-proto-devel-7.7 [=== ] 47/53
Installing : xorg-x11-proto-devel-7.7 [==== ] 47/53
Installing : xorg-x11-proto-devel-7.7 [===== ] 47/53
Installing : xorg-x11-proto-devel-7.7 [====== ] 47/53
Installing : xorg-x11-proto-devel-7.7 [======= ] 47/53
Installing : xorg-x11-proto-devel-7.7 [======== ] 47/53
Installing : xorg-x11-proto-devel-7.7 [========= ] 47/53
Installing : xorg-x11-proto-devel-7.7 [========== ] 47/53
Installing : xorg-x11-proto-devel-7.7 [=========== ] 47/53
Installing : xorg-x11-proto-devel-7.7 [============ ] 47/53
Installing : xorg-x11-proto-devel-7.7 [============= ] 47/53
Installing : xorg-x11-proto-devel-7.7 [============== ] 47/53
Installing : xorg-x11-proto-devel-7.7 [=============== ] 47/53
Installing : xorg-x11-proto-devel-7.7 [================ ] 47/53
Installing : xorg-x11-proto-devel-7.7 [================= ] 47/53
Installing : xorg-x11-proto-devel-7.7 [================== ] 47/53
Installing : xorg-x11-proto-devel-7.7 [=================== ] 47/53
Installing : xorg-x11-proto-devel-7.7 [==================== ] 47/53
Installing : xorg-x11-proto-devel-7.7 [===================== ] 47/53
Installing : xorg-x11-proto-devel-7.7 [====================== ] 47/53
Installing : xorg-x11-proto-devel-7.7 [======================= ] 47/53
Installing : xorg-x11-proto-devel-7.7 [======================== ] 47/53
Installing : xorg-x11-proto-devel-7.7-20.fc25.noarch 47/53
Installing : libXau-devel-1.0.8-11.fc [ ] 48/53
Installing : libXau-devel-1.0.8-11.fc [=========== ] 48/53
Installing : libXau-devel-1.0.8-11.fc [============ ] 48/53
Installing : libXau-devel-1.0.8-11.fc [============= ] 48/53
Installing : libXau-devel-1.0.8-11.fc [==================== ] 48/53
Installing : libXau-devel-1.0.8-11.fc [===================== ] 48/53
Installing : libXau-devel-1.0.8-11.fc [====================== ] 48/53
Installing : libXau-devel-1.0.8-11.fc [======================= ] 48/53
Installing : libXau-devel-1.0.8-11.fc [======================== ] 48/53
Installing : libXau-devel-1.0.8-11.fc28.riscv64 48/53
Installing : libXdmcp-1.1.2-3.fc28.ri [ ] 49/53
Installing : libXdmcp-1.1.2-3.fc28.ri [======= ] 49/53
Installing : libXdmcp-1.1.2-3.fc28.ri [============== ] 49/53
Installing : libXdmcp-1.1.2-3.fc28.ri [=============== ] 49/53
Installing : libXdmcp-1.1.2-3.fc28.ri [====================== ] 49/53
Installing : libXdmcp-1.1.2-3.fc28.ri [======================== ] 49/53
Installing : libXdmcp-1.1.2-3.fc28.riscv64 49/53
Running scriptlet: libXdmcp-1.1.2-3.fc28.riscv64 49/53
Installing : libXdmcp-devel-1.1.2-3.f [ ] 50/53
Installing : libXdmcp-devel-1.1.2-3.f [=================== ] 50/53
Installing : libXdmcp-devel-1.1.2-3.f [==================== ] 50/53
Installing : libXdmcp-devel-1.1.2-3.f [===================== ] 50/53
Installing : libXdmcp-devel-1.1.2-3.f [====================== ] 50/53
Installing : libXdmcp-devel-1.1.2-3.f [======================== ] 50/53
Installing : libXdmcp-devel-1.1.2-3.fc28.riscv64 50/53
Installing : libxcb-devel-1.12-5.0.ri [ ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [= ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [== ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [=== ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [==== ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [===== ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [====== ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [======= ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [======== ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [========= ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [========== ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [=========== ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [============ ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [============= ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [============== ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [=============== ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [================ ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [================= ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [================== ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [=================== ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [==================== ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [===================== ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [====================== ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [======================= ] 51/53
Installing : libxcb-devel-1.12-5.0.ri [======================== ] 51/53
Installing : libxcb-devel-1.12-5.0.riscv64.fc28.riscv64 51/53
Installing : xorg-x11-util-macros-1.1 [ ] 52/53
Installing : xorg-x11-util-macros-1.1 [===== ] 52/53
Installing : xorg-x11-util-macros-1.1 [========== ] 52/53
Installing : xorg-x11-util-macros-1.1 [=========== ] 52/53
Installing : xorg-x11-util-macros-1.1 [================ ] 52/53
Installing : xorg-x11-util-macros-1.1 [===================== ] 52/53
Installing : xorg-x11-util-macros-1.1 [====================== ] 52/53
Installing : xorg-x11-util-macros-1.1 [======================== ] 52/53
Installing : xorg-x11-util-macros-1.19.0-5.fc24.noarch 52/53
Installing : xorg-x11-xtrans-devel-1. [ ] 53/53
Installing : xorg-x11-xtrans-devel-1. [== ] 53/53
Installing : xorg-x11-xtrans-devel-1. [=== ] 53/53
Installing : xorg-x11-xtrans-devel-1. [====== ] 53/53
Installing : xorg-x11-xtrans-devel-1. [======== ] 53/53
Installing : xorg-x11-xtrans-devel-1. [========== ] 53/53
Installing : xorg-x11-xtrans-devel-1. [============ ] 53/53
Installing : xorg-x11-xtrans-devel-1. [============= ] 53/53
Installing : xorg-x11-xtrans-devel-1. [============== ] 53/53
Installing : xorg-x11-xtrans-devel-1. [=============== ] 53/53
Installing : xorg-x11-xtrans-devel-1. [================= ] 53/53
Installing : xorg-x11-xtrans-devel-1. [=================== ] 53/53
Installing : xorg-x11-xtrans-devel-1. [===================== ] 53/53
Installing : xorg-x11-xtrans-devel-1. [======================= ] 53/53
Installing : xorg-x11-xtrans-devel-1. [======================== ] 53/53
Installing : xorg-x11-xtrans-devel-1.3.5-3.fc24.noarch 53/53
Running scriptlet: xorg-x11-xtrans-devel-1.3.5-3.fc24.noarch 53/53
Verifying : libxcb-devel-1.12-5.0.riscv64.fc28.riscv64 1/53
Verifying : libXdmcp-devel-1.1.2-3.fc28.riscv64 2/53
Verifying : xorg-x11-util-macros-1.19.0-5.fc24.noarch 3/53
Verifying : xorg-x11-xtrans-devel-1.3.5-3.fc24.noarch 4/53
Verifying : libxcb-1.12-5.0.riscv64.fc28.riscv64 5/53
Verifying : libXdmcp-1.1.2-3.fc28.riscv64 6/53
Verifying : perl-Pod-Usage-4:1.69-408.fc27.0.riscv64.noarch 7/53
Verifying : libXau-devel-1.0.8-11.fc28.riscv64 8/53
Verifying : libXau-1.0.8-11.fc28.riscv64 9/53
Verifying : xorg-x11-proto-devel-7.7-20.fc25.noarch 10/53
Verifying : pkgconf-pkg-config-1.4.1-1.fc27.riscv64 11/53
Verifying : pkgconf-m4-1.4.1-1.fc27.noarch 12/53
Verifying : pkgconf-1.4.1-1.fc27.riscv64 13/53
Verifying : libpkgconf-1.4.1-1.fc27.riscv64 14/53
Verifying : autoconf-2.69-26.fc28.noarch 15/53
Verifying : emacs-filesystem-1:25.3-5.fc28.noarch 16/53
Verifying : automake-1.15.1-3.fc28.noarch 17/53
Verifying : libtool-2.4.6-21.fc27.riscv64 18/53
Verifying : tar-2:1.29-7.fc27.riscv64 19/53
Verifying : perl-Carp-1.42-408.fc27.0.riscv64.noarch 20/53
Verifying : perl-Exporter-5.72-408.fc27.0.riscv64.noarch 21/53
Verifying : perl-Getopt-Long-1:2.50-3.fc27.noarch 22/53
Verifying : perl-Pod-Perldoc-3.28-408.fc27.0.riscv64.noarch 23/53
Verifying : perl-podlators-4.09-408.fc27.0.riscv64.noarch 24/53
Verifying : perl-PathTools-3.67-408.fc27.0.riscv64.riscv64 25/53
Verifying : perl-interpreter-4:5.26.1-408.fc28.1.riscv64.riscv 26/53
Verifying : perl-libs-4:5.26.1-408.fc28.1.riscv64.riscv64 27/53
Verifying : perl-Errno-1.28-408.fc28.1.riscv64.riscv64 28/53
Verifying : perl-File-Temp-0.230.400-408.fc27.0.riscv64.noarch 29/53
Verifying : perl-HTTP-Tiny-0.070-408.fc27.0.riscv64.noarch 30/53
Verifying : perl-Pod-Simple-1:3.35-408.fc27.0.riscv64.noarch 31/53
Verifying : perl-Text-ParseWords-3.30-408.fc27.0.riscv64.noarc 32/53
Verifying : perl-parent-1:0.236-408.fc27.0.riscv64.noarch 33/53
Verifying : perl-Encode-4:2.94-16.fc27.riscv64 34/53
Verifying : perl-IO-1.38-408.fc28.1.riscv64.riscv64 35/53
Verifying : perl-Time-Local-1:1.250-394.fc27.noarch 36/53
Verifying : perl-Socket-4:2.027-1.fc27.riscv64 37/53
Verifying : perl-constant-1.33-408.fc27.0.riscv64.noarch 38/53
Verifying : perl-File-Path-2.15-1.fc27.noarch 39/53
Verifying : perl-Scalar-List-Utils-3:1.48-1.fc27.riscv64 40/53
Verifying : perl-Thread-Queue-3.12-408.fc27.0.riscv64.noarch 41/53
Verifying : perl-threads-1:2.21-1.fc27.riscv64 42/53
Verifying : m4-1.4.18-5.fc28.riscv64 43/53
Verifying : perl-Data-Dumper-2.167-408.fc27.0.riscv64.riscv64 44/53
Verifying : perl-Text-Tabs+Wrap-2013.0523-408.fc27.0.riscv64.n 45/53
Verifying : perl-Unicode-Normalize-1.25-408.fc27.0.riscv64.ris 46/53
Verifying : perl-macros-4:5.26.1-408.fc28.1.riscv64.riscv64 47/53
Verifying : perl-threads-shared-1.58-1.fc27.riscv64 48/53
Verifying : perl-MIME-Base64-3.15-408.fc27.0.riscv64.riscv64 49/53
Verifying : perl-Storable-1:2.62-408.fc27.0.riscv64.riscv64 50/53
Verifying : perl-Term-ANSIColor-4.06-408.fc27.0.riscv64.noarch 51/53
Verifying : perl-Term-Cap-1.17-408.fc27.0.riscv64.noarch 52/53
Verifying : perl-Pod-Escapes-1:1.07-408.fc27.0.riscv64.noarch 53/53
Installed:
libXau-devel.riscv64 1.0.8-11.fc28
libXdmcp-devel.riscv64 1.1.2-3.fc28
libxcb-devel.riscv64 1.12-5.0.riscv64.fc28
perl-Pod-Usage.noarch 4:1.69-408.fc27.0.riscv64
xorg-x11-proto-devel.noarch 7.7-20.fc25
xorg-x11-util-macros.noarch 1.19.0-5.fc24
xorg-x11-xtrans-devel.noarch 1.3.5-3.fc24
autoconf.noarch 2.69-26.fc28
automake.noarch 1.15.1-3.fc28
emacs-filesystem.noarch 1:25.3-5.fc28
libXau.riscv64 1.0.8-11.fc28
libXdmcp.riscv64 1.1.2-3.fc28
libpkgconf.riscv64 1.4.1-1.fc27
libtool.riscv64 2.4.6-21.fc27
libxcb.riscv64 1.12-5.0.riscv64.fc28
m4.riscv64 1.4.18-5.fc28
perl-Carp.noarch 1.42-408.fc27.0.riscv64
perl-Data-Dumper.riscv64 2.167-408.fc27.0.riscv64
perl-Encode.riscv64 4:2.94-16.fc27
perl-Errno.riscv64 1.28-408.fc28.1.riscv64
perl-Exporter.noarch 5.72-408.fc27.0.riscv64
perl-File-Path.noarch 2.15-1.fc27
perl-File-Temp.noarch 0.230.400-408.fc27.0.riscv64
perl-Getopt-Long.noarch 1:2.50-3.fc27
perl-HTTP-Tiny.noarch 0.070-408.fc27.0.riscv64
perl-IO.riscv64 1.38-408.fc28.1.riscv64
perl-MIME-Base64.riscv64 3.15-408.fc27.0.riscv64
perl-PathTools.riscv64 3.67-408.fc27.0.riscv64
perl-Pod-Escapes.noarch 1:1.07-408.fc27.0.riscv64
perl-Pod-Perldoc.noarch 3.28-408.fc27.0.riscv64
perl-Pod-Simple.noarch 1:3.35-408.fc27.0.riscv64
perl-Scalar-List-Utils.riscv64 3:1.48-1.fc27
perl-Socket.riscv64 4:2.027-1.fc27
perl-Storable.riscv64 1:2.62-408.fc27.0.riscv64
perl-Term-ANSIColor.noarch 4.06-408.fc27.0.riscv64
perl-Term-Cap.noarch 1.17-408.fc27.0.riscv64
perl-Text-ParseWords.noarch 3.30-408.fc27.0.riscv64
perl-Text-Tabs+Wrap.noarch 2013.0523-408.fc27.0.riscv64
perl-Thread-Queue.noarch 3.12-408.fc27.0.riscv64
perl-Time-Local.noarch 1:1.250-394.fc27
perl-Unicode-Normalize.riscv64 1.25-408.fc27.0.riscv64
perl-constant.noarch 1.33-408.fc27.0.riscv64
perl-interpreter.riscv64 4:5.26.1-408.fc28.1.riscv64
perl-libs.riscv64 4:5.26.1-408.fc28.1.riscv64
perl-macros.riscv64 4:5.26.1-408.fc28.1.riscv64
perl-parent.noarch 1:0.236-408.fc27.0.riscv64
perl-podlators.noarch 4.09-408.fc27.0.riscv64
perl-threads.riscv64 1:2.21-1.fc27
perl-threads-shared.riscv64 1.58-1.fc27
pkgconf.riscv64 1.4.1-1.fc27
pkgconf-m4.noarch 1.4.1-1.fc27
pkgconf-pkg-config.riscv64 1.4.1-1.fc27
tar.riscv64 2:1.29-7.fc27
Complete!
+ dnf -y update --best
Last metadata expiration check: 0:05:38 ago on Thu Feb 22 14:29:35 2018.
Dependencies resolved.
Nothing to do.
Complete!
+ dnf -y group install buildsys-build
Last metadata expiration check: 0:05:59 ago on Thu Feb 22 14:29:35 2018.
No match for group package "gcc-c++"
No match for group package "gcc"
Dependencies resolved.
================================================================================
Group Packages
================================================================================
Marking packages as installed by the group:
@Buildsystem building group unzip bash fedora-release
gawk rpm-build xz
make diffutils cpio
bzip2 findutils util-linux
grep redhat-rpm-config tar
shadow-utils coreutils which
sed info gzip
patch
================================================================================
Package Arch Version Repository
Size
================================================================================
Installing group packages:
bzip2 riscv64 1.0.6-24.fc28 local 81 k
diffutils riscv64 3.6-3.fc28 local 577 k
make riscv64 1:4.2.1-6.fc27 local 486 k
patch riscv64 2.7.5-6.fc27 local 270 k
redhat-rpm-config noarch 96-1.fc28.0.riscv64 local 75 k
rpm-build riscv64 4.14.1-6.fc28.1 local 235 k
unzip riscv64 6.0-36.fc28 local 398 k
which riscv64 2.21-4.fc28 local 65 k
xz riscv64 5.2.3-5.fc28 local 212 k
Installing dependencies:
binutils riscv64 2.30-1.fc28 local 6.9 M
dwz riscv64 0.12-5.fc28 local 108 k
elfutils riscv64 0.170-4.fc28 local 791 k
file riscv64 5.32-3.fc28 local 81 k
fpc-srpm-macros noarch 1.1-4.fc28 local 7.5 k
ghc-srpm-macros noarch 1.4.2-7.fc28 local 8.2 k
gnat-srpm-macros noarch 4-5.fc28 local 8.8 k
go-srpm-macros noarch 2-11.fc28 local 8.4 k
nim-srpm-macros noarch 1-1.fc28 local 7.6 k
ocaml-srpm-macros noarch 5-2.fc27 local 7.8 k
openblas-srpm-macros noarch 2-2.fc27 local 6.6 k
perl-srpm-macros noarch 1-26.fc28 local 9.7 k
python-srpm-macros noarch 3-26.fc28 local 10 k
qt5-srpm-macros noarch 5.10.0-1.fc28 local 9.0 k
rust-srpm-macros noarch 5-1.fc28 local 8.0 k
zip riscv64 3.0-20.fc28 local 271 k
zstd riscv64 1.3.3-1.fc27 local 1.1 M
Transaction Summary
================================================================================
Install 26 Packages
Total download size: 12 M
Installed size: 48 M
Downloading Packages:
(1/26): diffutils-3. 0% [ ] --- B/s | 0 B --:-- ETA
(1/26): redhat-rpm-config-96-1.fc28.0.riscv64.n 763 kB/s | 75 kB 00:00
(2-3/26): diffutils- 1% [ ] 1.6 MB/s | 235 kB 00:07 ETA
(2/26): nim-srpm-macros-1-1.fc28.noarch.rpm 270 kB/s | 7.6 kB 00:00
(3-4/26): diffutils- 2% [ ] 1.6 MB/s | 274 kB 00:07 ETA
(3/26): ocaml-srpm-macros-5-2.fc27.noarch.rpm 310 kB/s | 7.8 kB 00:00
(4-5/26): diffutils- 2% [- ] 1.5 MB/s | 314 kB 00:07 ETA
(4/26): openblas-srpm-macros-2-2.fc27.noarch.rp 261 kB/s | 6.6 kB 00:00
(5-6/26): diffutils- 2% [- ] 1.5 MB/s | 353 kB 00:07 ETA
(5/26): qt5-srpm-macros-5.10.0-1.fc28.noarch.rp 356 kB/s | 9.0 kB 00:00
(6-7/26): diffutils- 3% [- ] 1.5 MB/s | 394 kB 00:07 ETA
(6/26): rust-srpm-macros-5-1.fc28.noarch.rpm 317 kB/s | 8.0 kB 00:00
(7-8/26): diffutils- 3% [- ] 1.5 MB/s | 434 kB 00:07 ETA
(7/26): rpm-build-4.14.1-6.fc28.1.riscv64.rpm 885 kB/s | 235 kB 00:00
(8-9/26): make-4.2.1 9% [=- ] 1.6 MB/s | 1.1 MB 00:06 ETA
(8/26): make-4.2.1-6.fc27.riscv64.rpm 573 kB/s | 486 kB 00:00
(9-10/26): zstd-1.3. 11% [== ] 1.6 MB/s | 1.4 MB 00:06 ETA
(9/26): which-2.21-4.fc28.riscv64.rpm 715 kB/s | 65 kB 00:00
(10-11/26): zstd-1.3 13% [==- ] 1.6 MB/s | 1.6 MB 00:06 ETA
(10/26): diffutils-3.6-3.fc28.riscv64.rpm 516 kB/s | 577 kB 00:01
(11-12/26): patch-2. 14% [==- ] 1.5 MB/s | 1.6 MB 00:06 ETA
(11/26): patch-2.7.5-6.fc27.riscv64.rpm 644 kB/s | 270 kB 00:00
(12-13/26): unzip-6. 20% [==== ] 1.6 MB/s | 2.4 MB 00:05 ETA
(12/26): unzip-6.0-36.fc28.riscv64.rpm 777 kB/s | 398 kB 00:00
(13-14/26): zstd-1.3 24% [====- ] 1.6 MB/s | 2.8 MB 00:05 ETA
(13/26): xz-5.2.3-5.fc28.riscv64.rpm 646 kB/s | 212 kB 00:00
(14-15/26): zstd-1.3 25% [===== ] 1.6 MB/s | 3.0 MB 00:05 ETA
(14/26): bzip2-1.0.6-24.fc28.riscv64.rpm 473 kB/s | 81 kB 00:00
(15-16/26): zstd-1.3 26% [===== ] 1.6 MB/s | 3.1 MB 00:05 ETA
(15/26): file-5.32-3.fc28.riscv64.rpm 717 kB/s | 81 kB 00:00
(16-17/26): zstd-1.3 28% [=====- ] 1.6 MB/s | 3.3 MB 00:05 ETA
(16-18/26): zstd-1.3 35% [======= ] 1.7 MB/s | 4.1 MB 00:04 ETA
(16/26): zstd-1.3.3-1.fc27.riscv64.rpm 629 kB/s | 1.1 MB 00:01
(17-18/26): elfutils 38% [=======- ] 1.6 MB/s | 4.4 MB 00:04 ETA
(17/26): fpc-srpm-macros-1.1-4.fc28.noarch.rpm 262 kB/s | 7.5 kB 00:00
(18-19/26): elfutils 38% [=======- ] 1.6 MB/s | 4.5 MB 00:04 ETA
(18/26): ghc-srpm-macros-1.4.2-7.fc28.noarch.rp 314 kB/s | 8.2 kB 00:00
(19-20/26): binutils 38% [=======- ] 1.6 MB/s | 4.5 MB 00:04 ETA
(19/26): gnat-srpm-macros-4-5.fc28.noarch.rpm 342 kB/s | 8.8 kB 00:00
(20-21/26): binutils 39% [=======- ] 1.6 MB/s | 4.6 MB 00:04 ETA
(20/26): go-srpm-macros-2-11.fc28.noarch.rpm 331 kB/s | 8.4 kB 00:00
(21-22/26): binutils 39% [=======- ] 1.6 MB/s | 4.6 MB 00:04 ETA
(21/26): perl-srpm-macros-1-26.fc28.noarch.rpm 370 kB/s | 9.7 kB 00:00
(22-23/26): binutils 39% [=======- ] 1.6 MB/s | 4.6 MB 00:04 ETA
(22/26): python-srpm-macros-3-26.fc28.noarch.rp 385 kB/s | 10 kB 00:00
(23-24/26): binutils 40% [======== ] 1.6 MB/s | 4.7 MB 00:04 ETA
(23/26): dwz-0.12-5.fc28.riscv64.rpm 798 kB/s | 108 kB 00:00
(24-25/26): binutils 42% [========- ] 1.6 MB/s | 5.0 MB 00:04 ETA
(24/26): elfutils-0.170-4.fc28.riscv64.rpm 555 kB/s | 791 kB 00:01
(25-26/26): zip-3.0- 45% [========= ] 1.6 MB/s | 5.3 MB 00:04 ETA
(25/26): zip-3.0-20.fc28.riscv64.rpm 775 kB/s | 271 kB 00:00
(26/26): binutils-2. 48% [=========- ] 1.6 MB/s | 5.6 MB 00:03 ETA
(26/26): binutils-2. 55% [=========== ] 1.7 MB/s | 6.4 MB 00:03 ETA
(26/26): binutils-2. 62% [============ ] 1.7 MB/s | 7.3 MB 00:02 ETA
(26/26): binutils-2. 69% [=============- ] 1.8 MB/s | 8.1 MB 00:01 ETA
(26/26): binutils-2. 76% [=============== ] 1.9 MB/s | 9.0 MB 00:01 ETA
(26/26): binutils-2. 84% [================- ] 1.9 MB/s | 9.8 MB 00:00 ETA
(26/26): binutils-2. 91% [================== ] 2.0 MB/s | 11 MB 00:00 ETA
(26/26): binutils-2. 98% [===================-] 2.0 MB/s | 12 MB 00:00 ETA
(26/26): binutils-2.30-1.fc28.riscv64.rpm 1.6 MB/s | 6.9 MB 00:04
--------------------------------------------------------------------------------
Total 1.7 MB/s | 12 MB 00:06
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing : [= ] 1/1
Preparing : [=== ] 1/1
Preparing : [===== ] 1/1
Preparing : [======= ] 1/1
Preparing : [========= ] 1/1
Preparing : [=========== ] 1/1
Preparing : [============= ] 1/1
Preparing : [=============== ] 1/1
Preparing : [================= ] 1/1
Preparing : [=================== ] 1/1
Preparing : [===================== ] 1/1
Preparing : [======================= ] 1/1
Preparing : [========================= ] 1/1
Preparing : [=========================== ] 1/1
Preparing : [============================= ] 1/1
Preparing : [=============================== ] 1/1
Preparing : [================================= ] 1/1
Preparing : [=================================== ] 1/1
Preparing : [===================================== ] 1/1
Preparing : [====================================== ] 1/1
Preparing : [======================================== ] 1/1
Preparing : [========================================== ] 1/1
Preparing : [============================================ ] 1/1
Preparing : [============================================== ] 1/1
Preparing : [================================================ ] 1/1
Preparing : 1/1
Installing : file-5.32-3.fc28.riscv64 [ ] 1/26
Installing : file-5.32-3.fc28.riscv64 [====== ] 1/26
Installing : file-5.32-3.fc28.riscv64 [=========== ] 1/26
Installing : file-5.32-3.fc28.riscv64 [================== ] 1/26
Installing : file-5.32-3.fc28.riscv64 [===================== ] 1/26
Installing : file-5.32-3.fc28.riscv64 [====================== ] 1/26
Installing : file-5.32-3.fc28.riscv64 [======================= ] 1/26
Installing : file-5.32-3.fc28.riscv64 [======================== ] 1/26
Installing : file-5.32-3.fc28.riscv64 1/26
Installing : unzip-6.0-36.fc28.riscv6 [ ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [= ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [== ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [=== ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [==== ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [===== ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [====== ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [======= ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [======== ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [========= ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [========== ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [=========== ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [============ ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [============= ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [============== ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [=============== ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [================ ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [================= ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [================== ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [=================== ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [==================== ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [===================== ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [====================== ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [======================= ] 2/26
Installing : unzip-6.0-36.fc28.riscv6 [======================== ] 2/26
Installing : unzip-6.0-36.fc28.riscv64 2/26
Installing : zip-3.0-20.fc28.riscv64 [ ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [= ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [== ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [=== ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [==== ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [===== ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [====== ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [======= ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [======== ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [========= ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [========== ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [=========== ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [============ ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [============= ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [============== ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [=============== ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [================ ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [================= ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [================== ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [=================== ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [==================== ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [===================== ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [====================== ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [======================= ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [======================== ] 3/26
Installing : zip-3.0-20.fc28.riscv64 [========================= ] 3/26
Installing : zip-3.0-20.fc28.riscv64 3/26
Installing : dwz-0.12-5.fc28.riscv64 [ ] 4/26
Installing : dwz-0.12-5.fc28.riscv64 [=== ] 4/26
Installing : dwz-0.12-5.fc28.riscv64 [======= ] 4/26
Installing : dwz-0.12-5.fc28.riscv64 [=========== ] 4/26
Installing : dwz-0.12-5.fc28.riscv64 [=============== ] 4/26
Installing : dwz-0.12-5.fc28.riscv64 [================== ] 4/26
Installing : dwz-0.12-5.fc28.riscv64 [===================== ] 4/26
Installing : dwz-0.12-5.fc28.riscv64 [========================= ] 4/26
Installing : dwz-0.12-5.fc28.riscv64 4/26
Installing : python-srpm-macros-3-26. [ ] 5/26
Installing : python-srpm-macros-3-26. [======================= ] 5/26
Installing : python-srpm-macros-3-26.fc28.noarch 5/26
Installing : perl-srpm-macros-1-26.fc [ ] 6/26
Installing : perl-srpm-macros-1-26.fc [====================== ] 6/26
Installing : perl-srpm-macros-1-26.fc28.noarch 6/26
Installing : go-srpm-macros-2-11.fc28 [ ] 7/26
Installing : go-srpm-macros-2-11.fc28 [====================== ] 7/26
Installing : go-srpm-macros-2-11.fc28.noarch 7/26
Installing : gnat-srpm-macros-4-5.fc2 [ ] 8/26
Installing : gnat-srpm-macros-4-5.fc2 [====================== ] 8/26
Installing : gnat-srpm-macros-4-5.fc28.noarch 8/26
Installing : ghc-srpm-macros-1.4.2-7. [ ] 9/26
Installing : ghc-srpm-macros-1.4.2-7. [==================== ] 9/26
Installing : ghc-srpm-macros-1.4.2-7.fc28.noarch 9/26
Installing : fpc-srpm-macros-1.1-4.fc [ ] 10/26
Installing : fpc-srpm-macros-1.1-4.fc [================= ] 10/26
Installing : fpc-srpm-macros-1.1-4.fc28.noarch 10/26
Installing : binutils-2.30-1.fc28.ris [ ] 11/26
Installing : binutils-2.30-1.fc28.ris [= ] 11/26
Installing : binutils-2.30-1.fc28.ris [== ] 11/26
Installing : binutils-2.30-1.fc28.ris [=== ] 11/26
Installing : binutils-2.30-1.fc28.ris [==== ] 11/26
Installing : binutils-2.30-1.fc28.ris [===== ] 11/26
Installing : binutils-2.30-1.fc28.ris [====== ] 11/26
Installing : binutils-2.30-1.fc28.ris [======= ] 11/26
Installing : binutils-2.30-1.fc28.ris [======== ] 11/26
Installing : binutils-2.30-1.fc28.ris [========= ] 11/26
Installing : binutils-2.30-1.fc28.ris [========== ] 11/26
Installing : binutils-2.30-1.fc28.ris [=========== ] 11/26
Installing : binutils-2.30-1.fc28.ris [============ ] 11/26
Installing : binutils-2.30-1.fc28.ris [============= ] 11/26
Installing : binutils-2.30-1.fc28.ris [============== ] 11/26
Installing : binutils-2.30-1.fc28.ris [=============== ] 11/26
Installing : binutils-2.30-1.fc28.ris [================ ] 11/26
Installing : binutils-2.30-1.fc28.ris [================= ] 11/26
Installing : binutils-2.30-1.fc28.ris [================== ] 11/26
Installing : binutils-2.30-1.fc28.ris [=================== ] 11/26
Installing : binutils-2.30-1.fc28.ris [==================== ] 11/26
Installing : binutils-2.30-1.fc28.ris [===================== ] 11/26
Installing : binutils-2.30-1.fc28.ris [====================== ] 11/26
Installing : binutils-2.30-1.fc28.ris [======================= ] 11/26
Installing : binutils-2.30-1.fc28.ris [======================== ] 11/26
Installing : binutils-2.30-1.fc28.riscv64 11/26
Running scriptlet: binutils-2.30-1.fc28.riscv64 11/26
Installing : elfutils-0.170-4.fc28.ri [ ] 12/26
Installing : elfutils-0.170-4.fc28.ri [= ] 12/26
Installing : elfutils-0.170-4.fc28.ri [== ] 12/26
Installing : elfutils-0.170-4.fc28.ri [=== ] 12/26
Installing : elfutils-0.170-4.fc28.ri [==== ] 12/26
Installing : elfutils-0.170-4.fc28.ri [===== ] 12/26
Installing : elfutils-0.170-4.fc28.ri [====== ] 12/26
Installing : elfutils-0.170-4.fc28.ri [======= ] 12/26
Installing : elfutils-0.170-4.fc28.ri [======== ] 12/26
Installing : elfutils-0.170-4.fc28.ri [========= ] 12/26
Installing : elfutils-0.170-4.fc28.ri [========== ] 12/26
Installing : elfutils-0.170-4.fc28.ri [=========== ] 12/26
Installing : elfutils-0.170-4.fc28.ri [============ ] 12/26
Installing : elfutils-0.170-4.fc28.ri [============= ] 12/26
Installing : elfutils-0.170-4.fc28.ri [============== ] 12/26
Installing : elfutils-0.170-4.fc28.ri [=============== ] 12/26
Installing : elfutils-0.170-4.fc28.ri [================ ] 12/26
Installing : elfutils-0.170-4.fc28.ri [================= ] 12/26
Installing : elfutils-0.170-4.fc28.ri [================== ] 12/26
Installing : elfutils-0.170-4.fc28.ri [=================== ] 12/26
Installing : elfutils-0.170-4.fc28.ri [==================== ] 12/26
Installing : elfutils-0.170-4.fc28.ri [===================== ] 12/26
Installing : elfutils-0.170-4.fc28.ri [====================== ] 12/26
Installing : elfutils-0.170-4.fc28.ri [======================= ] 12/26
Installing : elfutils-0.170-4.fc28.ri [======================== ] 12/26
Installing : elfutils-0.170-4.fc28.riscv64 12/26
Installing : bzip2-1.0.6-24.fc28.risc [ ] 13/26
Installing : bzip2-1.0.6-24.fc28.risc [===== ] 13/26
Installing : bzip2-1.0.6-24.fc28.risc [========== ] 13/26
Installing : bzip2-1.0.6-24.fc28.risc [============== ] 13/26
Installing : bzip2-1.0.6-24.fc28.risc [=================== ] 13/26
Installing : bzip2-1.0.6-24.fc28.risc [===================== ] 13/26
Installing : bzip2-1.0.6-24.fc28.risc [======================= ] 13/26
Installing : bzip2-1.0.6-24.fc28.risc [======================== ] 13/26
Installing : bzip2-1.0.6-24.fc28.riscv64 13/26
Installing : xz-5.2.3-5.fc28.riscv64 [ ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [= ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [== ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [=== ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [===== ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [====== ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [======= ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [========= ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [========== ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [=========== ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [============ ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [============= ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [============== ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [=============== ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [================ ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [================== ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [=================== ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [==================== ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [===================== ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [====================== ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [======================= ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [======================== ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 [========================= ] 14/26
Installing : xz-5.2.3-5.fc28.riscv64 14/26
Installing : patch-2.7.5-6.fc27.riscv [ ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [= ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [== ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [=== ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [==== ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [===== ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [====== ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [======= ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [======== ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [========= ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [========== ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [=========== ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [============ ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [============= ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [============== ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [=============== ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [================ ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [================= ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [================== ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [=================== ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [==================== ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [===================== ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [====================== ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [======================= ] 15/26
Installing : patch-2.7.5-6.fc27.riscv [======================== ] 15/26
Installing : patch-2.7.5-6.fc27.riscv64 15/26
Installing : zstd-1.3.3-1.fc27.riscv6 [ ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [= ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [== ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [=== ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [==== ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [===== ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [====== ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [======= ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [======== ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [========= ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [========== ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [=========== ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [============ ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [============= ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [============== ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [=============== ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [================ ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [================= ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [================== ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [=================== ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [==================== ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [===================== ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [====================== ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [======================= ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv6 [======================== ] 16/26
Installing : zstd-1.3.3-1.fc27.riscv64 16/26
Installing : rust-srpm-macros-5-1.fc2 [ ] 17/26
Installing : rust-srpm-macros-5-1.fc2 [=== ] 17/26
Installing : rust-srpm-macros-5-1.fc2 [===== ] 17/26
Installing : rust-srpm-macros-5-1.fc2 [======================= ] 17/26
Installing : rust-srpm-macros-5-1.fc28.noarch 17/26
Installing : qt5-srpm-macros-5.10.0-1 [ ] 18/26
Installing : qt5-srpm-macros-5.10.0-1 [==================== ] 18/26
Installing : qt5-srpm-macros-5.10.0-1.fc28.noarch 18/26
Installing : openblas-srpm-macros-2-2 [ ] 19/26
Installing : openblas-srpm-macros-2-2 [================ ] 19/26
Installing : openblas-srpm-macros-2-2.fc27.noarch 19/26
Installing : ocaml-srpm-macros-5-2.fc [ ] 20/26
Installing : ocaml-srpm-macros-5-2.fc [===================== ] 20/26
Installing : ocaml-srpm-macros-5-2.fc27.noarch 20/26
Installing : nim-srpm-macros-1-1.fc28 [ ] 21/26
Installing : nim-srpm-macros-1-1.fc28 [=== ] 21/26
Installing : nim-srpm-macros-1-1.fc28 [===== ] 21/26
Installing : nim-srpm-macros-1-1.fc28 [======================= ] 21/26
Installing : nim-srpm-macros-1-1.fc28.noarch 21/26
Installing : redhat-rpm-config-96-1.f [ ] 22/26
Installing : redhat-rpm-config-96-1.f [== ] 22/26
Installing : redhat-rpm-config-96-1.f [=== ] 22/26
Installing : redhat-rpm-config-96-1.f [========= ] 22/26
Installing : redhat-rpm-config-96-1.f [=========== ] 22/26
Installing : redhat-rpm-config-96-1.f [================= ] 22/26
Installing : redhat-rpm-config-96-1.f [================== ] 22/26
Installing : redhat-rpm-config-96-1.f [=================== ] 22/26
Installing : redhat-rpm-config-96-1.f [===================== ] 22/26
Installing : redhat-rpm-config-96-1.f [====================== ] 22/26
Installing : redhat-rpm-config-96-1.f [======================== ] 22/26
Installing : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 22/26
Installing : diffutils-3.6-3.fc28.ris [ ] 23/26
Installing : diffutils-3.6-3.fc28.ris [= ] 23/26
Installing : diffutils-3.6-3.fc28.ris [== ] 23/26
Installing : diffutils-3.6-3.fc28.ris [=== ] 23/26
Installing : diffutils-3.6-3.fc28.ris [==== ] 23/26
Installing : diffutils-3.6-3.fc28.ris [===== ] 23/26
Installing : diffutils-3.6-3.fc28.ris [====== ] 23/26
Installing : diffutils-3.6-3.fc28.ris [======= ] 23/26
Installing : diffutils-3.6-3.fc28.ris [======== ] 23/26
Installing : diffutils-3.6-3.fc28.ris [========= ] 23/26
Installing : diffutils-3.6-3.fc28.ris [========== ] 23/26
Installing : diffutils-3.6-3.fc28.ris [=========== ] 23/26
Installing : diffutils-3.6-3.fc28.ris [============ ] 23/26
Installing : diffutils-3.6-3.fc28.ris [============= ] 23/26
Installing : diffutils-3.6-3.fc28.ris [============== ] 23/26
Installing : diffutils-3.6-3.fc28.ris [=============== ] 23/26
Installing : diffutils-3.6-3.fc28.ris [================ ] 23/26
Installing : diffutils-3.6-3.fc28.ris [================= ] 23/26
Installing : diffutils-3.6-3.fc28.ris [================== ] 23/26
Installing : diffutils-3.6-3.fc28.ris [=================== ] 23/26
Installing : diffutils-3.6-3.fc28.ris [==================== ] 23/26
Installing : diffutils-3.6-3.fc28.ris [===================== ] 23/26
Installing : diffutils-3.6-3.fc28.ris [====================== ] 23/26
Installing : diffutils-3.6-3.fc28.ris [======================= ] 23/26
Installing : diffutils-3.6-3.fc28.ris [======================== ] 23/26
Installing : diffutils-3.6-3.fc28.riscv64 23/26
Running scriptlet: diffutils-3.6-3.fc28.riscv64 23/26
Installing : rpm-build-4.14.1-6.fc28. [ ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [= ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [== ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [=== ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [==== ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [===== ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [====== ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [======= ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [======== ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [========= ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [=========== ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [============ ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [============== ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [=============== ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [================ ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [================= ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [================== ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [=================== ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [==================== ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [===================== ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [====================== ] 24/26
Installing : rpm-build-4.14.1-6.fc28. [======================== ] 24/26
Installing : rpm-build-4.14.1-6.fc28.1.riscv64 24/26
Installing : which-2.21-4.fc28.riscv6 [ ] 25/26
Installing : which-2.21-4.fc28.riscv6 [===== ] 25/26
Installing : which-2.21-4.fc28.riscv6 [=========== ] 25/26
Installing : which-2.21-4.fc28.riscv6 [=============== ] 25/26
Installing : which-2.21-4.fc28.riscv6 [================ ] 25/26
Installing : which-2.21-4.fc28.riscv6 [================= ] 25/26
Installing : which-2.21-4.fc28.riscv6 [================== ] 25/26
Installing : which-2.21-4.fc28.riscv6 [======================== ] 25/26
Installing : which-2.21-4.fc28.riscv64 25/26
Running scriptlet: which-2.21-4.fc28.riscv64 25/26
Installing : make-1:4.2.1-6.fc27.risc [ ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [= ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [== ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [=== ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [==== ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [===== ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [====== ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [======= ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [======== ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [========= ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [========== ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [=========== ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [============ ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [============= ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [============== ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [=============== ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [================ ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [================= ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [================== ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [=================== ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [==================== ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [===================== ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [====================== ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [======================= ] 26/26
Installing : make-1:4.2.1-6.fc27.risc [======================== ] 26/26
Installing : make-1:4.2.1-6.fc27.riscv64 26/26
Running scriptlet: make-1:4.2.1-6.fc27.riscv64 26/26
Verifying : diffutils-3.6-3.fc28.riscv64 1/26
Verifying : make-1:4.2.1-6.fc27.riscv64 2/26
Verifying : redhat-rpm-config-96-1.fc28.0.riscv64.noarch 3/26
Verifying : nim-srpm-macros-1-1.fc28.noarch 4/26
Verifying : ocaml-srpm-macros-5-2.fc27.noarch 5/26
Verifying : openblas-srpm-macros-2-2.fc27.noarch 6/26
Verifying : qt5-srpm-macros-5.10.0-1.fc28.noarch 7/26
Verifying : rust-srpm-macros-5-1.fc28.noarch 8/26
Verifying : rpm-build-4.14.1-6.fc28.1.riscv64 9/26
Verifying : zstd-1.3.3-1.fc27.riscv64 10/26
Verifying : which-2.21-4.fc28.riscv64 11/26
Verifying : patch-2.7.5-6.fc27.riscv64 12/26
Verifying : unzip-6.0-36.fc28.riscv64 13/26
Verifying : xz-5.2.3-5.fc28.riscv64 14/26
Verifying : bzip2-1.0.6-24.fc28.riscv64 15/26
Verifying : elfutils-0.170-4.fc28.riscv64 16/26
Verifying : file-5.32-3.fc28.riscv64 17/26
Verifying : binutils-2.30-1.fc28.riscv64 18/26
Verifying : fpc-srpm-macros-1.1-4.fc28.noarch 19/26
Verifying : ghc-srpm-macros-1.4.2-7.fc28.noarch 20/26
Verifying : gnat-srpm-macros-4-5.fc28.noarch 21/26
Verifying : go-srpm-macros-2-11.fc28.noarch 22/26
Verifying : perl-srpm-macros-1-26.fc28.noarch 23/26
Verifying : python-srpm-macros-3-26.fc28.noarch 24/26
Verifying : dwz-0.12-5.fc28.riscv64 25/26
Verifying : zip-3.0-20.fc28.riscv64 26/26
Installed:
bzip2.riscv64 1.0.6-24.fc28
diffutils.riscv64 3.6-3.fc28
make.riscv64 1:4.2.1-6.fc27
patch.riscv64 2.7.5-6.fc27
redhat-rpm-config.noarch 96-1.fc28.0.riscv64
rpm-build.riscv64 4.14.1-6.fc28.1
unzip.riscv64 6.0-36.fc28
which.riscv64 2.21-4.fc28
xz.riscv64 5.2.3-5.fc28
binutils.riscv64 2.30-1.fc28
dwz.riscv64 0.12-5.fc28
elfutils.riscv64 0.170-4.fc28
file.riscv64 5.32-3.fc28
fpc-srpm-macros.noarch 1.1-4.fc28
ghc-srpm-macros.noarch 1.4.2-7.fc28
gnat-srpm-macros.noarch 4-5.fc28
go-srpm-macros.noarch 2-11.fc28
nim-srpm-macros.noarch 1-1.fc28
ocaml-srpm-macros.noarch 5-2.fc27
openblas-srpm-macros.noarch 2-2.fc27
perl-srpm-macros.noarch 1-26.fc28
python-srpm-macros.noarch 3-26.fc28
qt5-srpm-macros.noarch 5.10.0-1.fc28
rust-srpm-macros.noarch 5-1.fc28
zip.riscv64 3.0-20.fc28
zstd.riscv64 1.3.3-1.fc27
Complete!
+ dnf -y install hack-gcc glibc-devel
Last metadata expiration check: 0:07:50 ago on Thu Feb 22 14:29:35 2018.
Package hack-gcc-7.3.1-0.2.riscv64 is already installed, skipping.
Dependencies resolved.
================================================================================
Package Arch Version Repository Size
================================================================================
Installing:
glibc-devel riscv64 2.27-4.fc28 local 1.0 M
Installing dependencies:
glibc-headers riscv64 2.27-4.fc28 local 442 k
kernel-headers noarch 4.15.0-1.fc27 local 1.1 M
libxcrypt-devel riscv64 4.0.0-4.fc28 local 15 k
Transaction Summary
================================================================================
Install 4 Packages
Total download size: 2.5 M
Installed size: 7.1 M
Downloading Packages:
(1/4): glibc-devel-2 0% [ ] --- B/s | 0 B --:-- ETA
(1/4): libxcrypt-devel-4.0.0-4.fc28.riscv64.rpm 545 kB/s | 15 kB 00:00
(2-3/4): glibc-heade 1% [ ] 616 kB/s | 46 kB 00:04 ETA
(2-4/4): glibc-devel 35% [======= ] 751 kB/s | 910 kB 00:02 ETA
(2/4): glibc-headers-2.27-4.fc28.riscv64.rpm 802 kB/s | 442 kB 00:00
(3-4/4): glibc-devel 52% [========== ] 807 kB/s | 1.3 MB 00:01 ETA
(3-4/4): glibc-devel 89% [=================- ] 947 kB/s | 2.2 MB 00:00 ETA
(3/4): glibc-devel-2.27-4.fc28.riscv64.rpm 953 kB/s | 1.0 MB 00:01
(4/4): kernel-header 95% [=================== ] 948 kB/s | 2.4 MB 00:00 ETA
(4/4): kernel-headers-4.15.0-1.fc27.noarch.rpm 980 kB/s | 1.1 MB 00:01
--------------------------------------------------------------------------------
Total 1.9 MB/s | 2.5 MB 00:01
Running transaction check
Transaction check succeeded.
Running transaction test
Transaction test succeeded.
Running transaction
Preparing : [============ ] 1/1
Preparing : [========================= ] 1/1
Preparing : [====================================== ] 1/1
Preparing : 1/1
Installing : kernel-headers-4.15.0-1.f [ ] 1/4
Installing : kernel-headers-4.15.0-1.f [= ] 1/4
Installing : kernel-headers-4.15.0-1.f [== ] 1/4
Installing : kernel-headers-4.15.0-1.f [=== ] 1/4
Installing : kernel-headers-4.15.0-1.f [==== ] 1/4
Installing : kernel-headers-4.15.0-1.f [===== ] 1/4
Installing : kernel-headers-4.15.0-1.f [====== ] 1/4
Installing : kernel-headers-4.15.0-1.f [======= ] 1/4
Installing : kernel-headers-4.15.0-1.f [======== ] 1/4
Installing : kernel-headers-4.15.0-1.f [========= ] 1/4
Installing : kernel-headers-4.15.0-1.f [========== ] 1/4
Installing : kernel-headers-4.15.0-1.f [=========== ] 1/4
Installing : kernel-headers-4.15.0-1.f [============ ] 1/4
Installing : kernel-headers-4.15.0-1.f [============= ] 1/4
Installing : kernel-headers-4.15.0-1.f [============== ] 1/4
Installing : kernel-headers-4.15.0-1.f [=============== ] 1/4
Installing : kernel-headers-4.15.0-1.f [================ ] 1/4
Installing : kernel-headers-4.15.0-1.f [================= ] 1/4
Installing : kernel-headers-4.15.0-1.f [================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [=================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [==================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [===================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [====================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [======================= ] 1/4
Installing : kernel-headers-4.15.0-1.f [======================== ] 1/4
Installing : kernel-headers-4.15.0-1.f [========================= ] 1/4
Installing : kernel-headers-4.15.0-1.fc27.noarch 1/4
Running scriptlet: glibc-headers-2.27-4.fc28.riscv64 2/4
Installing : glibc-headers-2.27-4.fc28 [ ] 2/4
Installing : glibc-headers-2.27-4.fc28 [= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [=== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [==== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [===== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [====== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [======= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [======== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [========= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [========== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [=========== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [============ ] 2/4
Installing : glibc-headers-2.27-4.fc28 [============= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [============== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [=============== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [================ ] 2/4
Installing : glibc-headers-2.27-4.fc28 [================= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [=================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [==================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [===================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [====================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [======================= ] 2/4
Installing : glibc-headers-2.27-4.fc28 [======================== ] 2/4
Installing : glibc-headers-2.27-4.fc28 [========================= ] 2/4
Installing : glibc-headers-2.27-4.fc28.riscv64 2/4
Installing : libxcrypt-devel-4.0.0-4.f [ ] 3/4
Installing : libxcrypt-devel-4.0.0-4.f [============ ] 3/4
Installing : libxcrypt-devel-4.0.0-4.f [============= ] 3/4
Installing : libxcrypt-devel-4.0.0-4.f [===================== ] 3/4
Installing : libxcrypt-devel-4.0.0-4.f [========================= ] 3/4
Installing : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4
Installing : glibc-devel-2.27-4.fc28.r [ ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [=== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [==== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [===== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [====== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [======= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [======== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [========= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [========== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [=========== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [============ ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [============= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [============== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [=============== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [================ ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [================= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [=================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [==================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [===================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [====================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [======================= ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [======================== ] 4/4
Installing : glibc-devel-2.27-4.fc28.r [========================= ] 4/4
Installing : glibc-devel-2.27-4.fc28.riscv64 4/4
Running scriptlet: glibc-devel-2.27-4.fc28.riscv64 4/4
Verifying : glibc-devel-2.27-4.fc28.riscv64 1/4
Verifying : glibc-headers-2.27-4.fc28.riscv64 2/4
Verifying : libxcrypt-devel-4.0.0-4.fc28.riscv64 3/4
Verifying : kernel-headers-4.15.0-1.fc27.noarch 4/4
Installed:
glibc-devel.riscv64 2.27-4.fc28 glibc-headers.riscv64 2.27-4.fc28
kernel-headers.noarch 4.15.0-1.fc27 libxcrypt-devel.riscv64 4.0.0-4.fc28
Complete!
+ touch /rootok
+ cleanup
+ set +e
+ sync
+ sleep 5
+ sync
+ mount.static -o remount,ro /
+ poweroff
reboot: Power down
Power off